WEICON Main Catalogue Chemical and technical products Page 186
Offre client commercial**Meilleures ventes de Weicon
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Adhesives / Sealants Technical Data Brushable Liquid Zinc Paint Brushable Liquid Zinc Coating Aluminium Paint zinc-grey / matt matching hot-dip galvanizations aluminium / metallic shine epoxy resin ester alkyd resin alkyd combination zinc pigments (D50 4 μm) zinc and aluminium pigments (D50 25 μm) aluminium pigments (D50 16 μm) Pigment purity: approx. 98.5 % approx. AL 99.5 % and ZN 99.9 % approx. 99.5 % Specific weight: 2.00 g/cm³ 1.25 g/cm³ 1.00 g/cm³ approx. 60.5 % approx. 58.5 % approx. 32.0 % approx. 70 s 4 mm / stretchable approx. 70 s 4 mm / stretchable approx. 120 s 4 mm / stretchable +18°C to +30°C (+64°C to +86°F) +18 °C to +30 °C (+64 °C to +86 °F) +18 °C to +30 °C (+64 °C to +86 °F) approx. 120 ml/m² approx. 120 ml/m² approx. 150 ml/m² 10 - 20 % universal thinning 10 - 20 % universal thinning 10 - 20 % universal thinning 30 minutes 60 minutes 60 minutes Hardened*: 12 hours 12 hours 12 hours Recoatable / can be reprimed*: 12 hours 12 hours 12 hours Final hardness*: 48 hours 48 hours 48 hours 50 μm 30 μm 20 μm characteristic value GT 0 to GT 1 characteristic value GT 0 to GT 1 characteristic value GT 0 to GT 1 400 hours 200 hours 100 hours no formation of hairline cracks no formation of hairline cracks no formation of hairline cracks approx. +400 °C (+752 °F) approx. +240 °C (+464°F) not necessary not necessary WEICON Brushable Zinc Paint / Brushable Zinc Coating 12 months 12 months 12 months 375 ml and 750 ml can 375 ml and 750 ml can 375 ml and 750 ml can < 500 g/l VOC < 500 g/l VOC < 500 g/l VOC Colour shade / level of brilliance: Binding agents: Technical Sprays Pigment: Percentage of metal in the dry film: Technical Liquids Viscosity* (DIN EN ISO 2431) / Consistency: Processing temperature: Consumption: Spray consistency: Assembly Pastes Drying time (dust dry): Minimum layer thickness (ISO 2409): Cross-cut test (DIN 53151/ISO 2409): Lubricants Salt spray test (DIN EN ISO 9227) Mandrel bending test, mandrel 5 mm (DIN EN ISO 1519): Temperature resistance after reaching the final hardness: WEICON TOOLS® Primer: Shelf life**: Available in: Classification in accordance with Directive 2004/42 EC category 'A/i' single component special paints: Other * +20°C (+68°F) can / surface temperature and 50% relative humidity. ** With a constant room temperature and storage in a dry place. This applies to closed original containers which are not exposed to direct and/or indirect sunlight. 186 Catalogue WEICON approx. +300 °C (+572 °F) (from +100 °C (+212 °F), slight discolourations are possible)
244 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.