Rothenberger Maincatalog Page 332
Offre client commercial**Meilleures ventes de Rothenberger
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
GOOD TO KNOW Refrigerant data from CFC-alternative refrigerants Refrigerant Composition ODP GWP R22 (HFCKW refrigerant) CHCLF₂ 0.05 1,810 CF₃CH2F 0 1,430 R32 (HFKW-chlorine-free refrigerant) CH2F2 0 675 R404A (HFKW-chlorine-free blends) 52 % R143a, 44 % R125, 4 % R134a 0 3,922 0 3,985 R407C (HFKW-chlorine-free blends) 23 % R32, 25 % R125, 52 % R134a R134a (HFKW-chlorine-free refrigerant) R507 (HFKW-chlorine-free blends) R410A (HFKW-chlorine-free blends) 50 % R143a, 50 % R125 50 % R32, 50 % R125 0 1,774 0 2,088 Temperature glide 7.5 K 0.2 K ODP = Ozone Depletion Potential (degree in which the ozone layer is destroyed) GWP = Global Warming Potential (degree in which it contributes to the greenhouse effect) Instructions for safe and proper use of the refrigerants Refrigerant • Wear protective gloves and safety goggles • Do not let refrigerant come in contact with skin • Do not inhale high concentrations of vapours (Lack of oxygen causes a narcotic effect and is a danger to life) • Do not smoke around refrigerant • Working place / room must be thoroughly aired, if necessary extracted Refrigerant bottles • Secure against accidents, do not throw • Do not expose to direct sunlight and do not place near radiators or other heat sources • Do not use open flame • Do not disassemble or remove valves • Damaged bottles need to be properly returned • Close empty containers Air-conditioners • Air-conditioner leaks need to be repaired immediately • Do not allow refrigerant to leak while filling or doing maintenance work • In high concentrations (for example pipe burst), leave the room and do not enter again until it has been properly ventilated • Only do brazing work together with protective nitrogen gas and only in well ventilated areas Flare connections Normal flare size in accordance with JIS B8607:2008 Flare outer diameter in relationship to the pipe diameter Pipe outer diameter mm / inch 13 Metric 6 mm 1 mm 10 mm 1 mm 16 mm 1 mm 8 mm 1 mm 12 mm 18 mm 1/4″ 6.35 mm 3/8″ 9.52 mm 5/16″ 1/2″ 5/8″ 3/4″ 332 Wall thickness mm / inch 7.94 mm Flare outer diameter with R22-, R134a-, R404-, R407C air-conditioners 8.5 mm 11.1 mm 13.6 mm 9.1 mm 11.1 mm 13.2 mm 1 mm 15.3 mm 16.5 mm 1 mm 22.0 mm 22.7 mm 0.35″ 0.35″ 0.35″ 19.5 mm 9.0 mm 11.0 mm 13.0 mm 12.70 mm 0.35″ 16.2 mm 19.05 mm 0.35″ 23.3 mm 15.88 mm Flare outer diameter with R410A air-conditioners 0.35″ 19.4 mm 19.2 mm 9.1 mm 11.1 mm 13.2 mm 16.6 mm 19.7 mm 24.0 mm
396 Pages | Valable jusqu’au 12/2026 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.