Pneumax - Fluid Control Page 9
Offre client commercial**Meilleures ventes de Pneumax GmbH
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Series F300 Pneumax Fluid Control Catalogue Servo-assisted solenoid valves Large-sized passage orifices increase the value of the static pressure which has to be overcome by the magnetic field produced by the coil. These solenoid valves are used to control high-pressure values with large diameter bores. In these models, the fluid helps in the opening or closing of the main poppet. PNEUMAX FLUID CONTROL They can be normally closed (2/2 N.C.) and have an input and a utilisation connection machined into the valve body and at rest the fluid is intercepted by the main poppet, which can be either diaphragm or a piston. In this condition, the fluid acts on both faces of the main plunger though a pinhole contributing to closure of the poppet. Applying electrical power, the secondary, or pilot, orifice opens leading to the exhaust of the fluid, which acts to close the main poppet. Greater force is thus applied when opening, the poppet is raised from the orifice and allows the media to flows to the output. In these versions, performance does not depend solely on the magnetic field produced by the coil; a minimum input pressure is also needed so as to move the diaphragm or the piston overcoming its rigidity and to keep it raised from the main orifice (Δp minimum performance). They can be normally open (2/2 N.O.) and have an input and output connection machined into the valve body, and at rest the core tube communicates with output, a minimum-pressure difference between the feed and the output causes the main poppet to rise, leading to it opening. Applying electrical power, the secondary orifice closes and equilibrium between the pressure on the two faces of the main poppet is reinstated, and so it returns to its closed position on the main orifice. In this version a minimum working pressure is also needed. Sealing materials Designation Trade names General characteristics Field of use FPM (Fluorocarbon) VITON TECNOFLON FLUOREL A synthetic hexa-fluoropropylene-based elastomer. Excellent resistance to high temperatures. Excellent resistance to ozone, oxygen, mineral oils, synthetic hydraulic fluids, fuels, hydrocarbons and many chemical products. Not specific for superheated steam. For general use up to 140 °C Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 7
67 Pages | Valable jusqu’au 06/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.