PFERD Tools Main Catalogue Page 97
Offre client commercial**Meilleures ventes de PFERD
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
TC burrs PFERD TOOLS cuts INOX cut ■ Extremely high stock removal rate on all austenitic, rust and acid-resistant steels, stainless steel (INOX) and soft titanium alloys (tensile strength < 500 N/mm²). ■ Significantly reduced vibration and less noise. ■ Burrs with HICOAT coating HC-STS demonstrate high hardness and wear resistance in comparison with uncoated burrs. 2 ALU cut ■ High stock removal rate on aluminium and aluminium alloys, non-ferrous metals and plastics. ■ Smooth milling. ■ High-quality HICOAT coating HC-NFE for long-chipping and smearing aluminium alloys and non-ferrous metals. ■ Can be used with cutting speeds of up to 1,100 m/min (HC-NFE: up to 1,300 m/min). NON-FERROUS cut ■ High stock removal rate on non-ferrous metals, brass, copper, plastics and fibrereinforced plastics. ■ Suitable for universal use. CAST cut ■ Extremely high stock removal rate on cast iron. ■ Smooth milling. ■ Reduced vibration and less noise. TITANIUM cut ■ Outstanding stock removal rate and tool life on hard titanium alloys. ■ Tangibly more aggressive, large chips and very good chip removal. ■ Reduced vibration and less noise. ■ For soft titanium alloys (tensile strength < 500 N/mm²), PFERD TOOLS recommends the INOX cut. EDGE cut ■ Creates exact edge shapes – with either 30° or 45° chamfering or a defined radius of 3.0 mm. ■ Safe and comfortable to guide. PLAST cut ■ Trimming and contour milling of workpieces made from less hard glass and carbon-fibre-reinforced duroplastics (GRP and CRP with ≤ 40 % fibre content) and fibre-reinforced thermoplastics. ■ Minimized delamination and fraying through straight cut. ■ Highly suitable for use on machines and on robots. ■ Reduced vibration and less noise. FVK cut ■ Trimming and contour milling of workpieces made from hard glass and carbon-fibre-reinforced duroplastics (also GRP and CRP > 40 %). FVKS cut ■ Similar to the FVK cut. ■ Smooth milling. ■ Generates smooth cut edges. ■ For use on machines and robots with high feed rates. TOUGH cut ■ High stock removal rate on cast iron, steel < 54 HRC. ■ Extremely resistant to impacts. ■ Also suitable for use with high surface contact angles > 1/3 and under impact loads. TOUGH-S cut ■ High stock removal rate on cast iron, steel < 54 HRC. ■ Similar to the TOUGH cut, but with smoother milling and shorter chips. ■ Extremely resistant to impacts. ■ Also suitable for use with high surface contact angles > 1/3 and under impact loads. MICRO cut ■ Good stock removal on almost all materials < 68 HRC. ■ High surface quality. ■ Reduced vibration and less noise. ■ Burrs with HICOAT coating HC-FEP for high hardness and wear resistance. Note ■ On tungsten carbide burrs designed for high-performance applications, blue discolouration cannot be avoided on account of the very high stock removal rate. However, this does not constitute a safety risk. 8|2 Catalogue
853 Pages | Valable jusqu’au 12/2026 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.