MUNK - Access Solutions 2023 Page 330
Offre client commercial**Produits de la page du catalogue
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
min. 1600 mm to top edge back protection hoop 06 min. 1680 mm up to top edge rung Head up to min. 1680 mm up to bottom edge back protection hoop www.steigtechnik.de Figure in accordance with the current editions of the DIN 18799-1 and DIN 18799-3 standards Range of application On buildings for maintenance and cleaning work. Specific regulations govern attachment and back protection on chimneys – please send us your enquiry Irrespective of the climbing height: Either back protection or climbing protection can be used as fall protection (combination not permitted as the rescue of persons is hindered by the back protection) Step-on dimension: Distance from entry level to the first rung 100–400 mm When exiting forwards, the uppermost rung must be at the height of the exit level Vertical ladders with fall protection require at least 800 × 800 mm clear space available in front of the ladder when climbing off it. These dimensions must also be observed for new installations in the existing system The clearances between the vertical ladder system The need for an occupational medical examination and the railing must not exceed 180 mm for suitability for working at height (e.g. G 41) The connection to the fall protection must be depends on the risk assessment (e.g. total climbing established and detached from a secured standing height, type of fall protection) of the respective position vertical ladder systems A secured standing position is, for example, a Proof of the load-bearing capacity of the platform with railing and secured access underlying surface must be provided for each For safe gripping of the side-rails, the clearance construction project by a responsible stability to adjacent parts around the side-rails must be at expert least 75 mm (except for components forming part Barrier (safety door) is always required of the vertical ladder system) The vertical overlap of successive ladder sections must be at least 1,680 mm At unsecured exit levels, railings attached to both sides of the vertical ladder or led into the exit level are required Gap at exit step must not be larger than 75 mm 330
404 Pages | Valable jusqu’au 12/2023 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.