Hase Safety Gloves Collection - English Page 8
Offre client commercial**Meilleures ventes de Hase Safety Gloves
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
15 EN 388 - REQUIREMENTS AGAINST MECHANICAL RISKS The EN 388 standard describes the test procedures for determining the performance levels of certain mechanical risks. The pictogram is marked with five or six level values. EN 388 ABCDEF Performance levels A - abrasion resistance Level 1 - 4 Depending on thickness and coating, it is being measured how many grinding cycles it takes until the material is worn through. B - cut resistance Coupe-Test Level 1 - 5 The number of blade rotations until the glove is cut through as well as the abrasion degree of the blade is measured. C - tear resistance Level 1 - 4 The force required to tear the material of a glove to a nominal length is measured. D - puncture resistance Level 1 - 4 The force necessary to penetrate the material of a glove with a steel pin is measured. E - cut resistance ISO 13997 Level A - F This test is performed with a new blade and more pressure each time until the material is cut through or has passed the maximum test level. F - impact protection EN 13594 P = passed This test measures the energy and force transfer when a weight is dropped on the glove. Gloves without protection are not marked. 0 means not passed, level X can be used for A to E and stands for "not tested" or "not relevant" - e.g. 4243 X or 3X43 C P CUT PROTECTION TEST IN COMPARISON Representative for work with sharp and light objects MECHANICAL RISKS Representative for different, impacting force effects EN 388 Cut: rotating Cut: straight ABCDEF COUPE-TEST (EN 388:2003) ISO 13997 (EN 388:2016)
65 Pages | Valable jusqu’au 12/2023 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
