GEDORE Automotive KLANN HGV Catalogue Page 18
Offre client commercial**Produits de la page du catalogue
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
2. Axle Repair Tools 2.2 Support Joints, Bearings and Bushings (Code 3249255) KL-1340-401 Special Socket, 44mm waf, PSA KL-1340-401 Applicable to screw-in type suspension ball joints having a waf size of 44mm as found at the front axle of Citroën, Peugeot and Toyota vehicles. For example: Toyota PROACE II, PROACE VERSO; Citroën Jumpy III, Spacetourer; Peugeot Expert III. For the professional loosening and tightening of front wishbone screw-in type suspension ball joints. An indispensable tool when replacing damaged or worn suspension ball joints in these applications. Recommended Accessory: 1993 U-20 Reversible ratchet 1/2" Technical Data: Waf size: Drive: Length: Profile: 44mm 1/2" 85mm special hex profile (Code 2686295) KL-1220-246 Socket, Size (waf) 46mm, Fiat Ducato/ Citroën Jumper/Peugeot Boxer KL-1220-246 Applicable to Fiat Ducato, Citroën Jumper and Peugeot Boxer. For loosening and tightening the drive shaft fastening nut. Recommended Accessory: 1993 U-20 Reversible Ratchet 1/2" Technical Data: Size (waf): Profile: Drive: Length: KL-0039-7533 9 pcs. 46mm bi-hex 1/2“ 100mm (Code 2489708) KL-0039-7533 Sleeve Set, Mercedes Sprinter / VW Crafter Applicable to lower ball joints on front axle wishbones as found in: Mercedes Sprinter (W901, W902, W903, W904, W906, W907) as well as VW Crafter (2E/2F), VW LT (2D). Used in conjunction with the necessary drive parts, the sleeve set enables the suspension ball joints to be quickly and properly pressed out/into the lower wishbone in situ on the vehicle. No need to dismantle and re-install the wishbone! Necessary Drive Parts (cf. Chapter Drives): Hydraulic Drive: KL-0040-2500 Hydraulic Cylinder (17t), KL-0040-35 M25 Hydraulic Pump, KL-0039-1930 Pressure Spindle (M20x350), KL-0039-1002 Adaptor, KL-0039-1140 Press Frame Mechanical Drive: KL-0174-831 Spindle, KL-0039-1140 Press Frame, KL-0039-1002 Retaining Adaptor Scope of Delivery: KL-0039-7533 Sleeve Set, Mercedes Sprinter / VW Crafter Part No. KL-0039-7534 KL-0039-1829 KL-0039-1762 KL-0039-1662 18 Copyright GEDORE Automotive GmbH, Germany Description Support Sleeve with Clamping Washer Press Sleeve Press Sleeve, Ø 62mm, long Support Sleeve, Ø 62mm, short Qty 1 1 1 1
100 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
