Ganter Norm Standard Parts - Catalogue Page 394
Offre client commercial**Meilleures ventes de Ganter Norm
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
GN 323.9 Disk Handwheels continued Installation sequence 1. Turn spindle into the starting position (0-position). 2. Set the length of the pallet pin and lock in place with hex nut. Make sure that the pin does not sit on the drill hole base after mounting the handwheel. 3. Turn the position indicator to the 0-position by turning the outer gear wheel to the 0-position. 4. Hold the (unmounted) handwheel such that the hole for the gear pinion is in the „12 o‘clock“ position and turn the crown wheel until the pallet pin is in the recess bore at the machine body. 5. Carefully insert the position indicator into the hand knob, making sure that the gear pinion engages in the crown wheel. The crown wheel may need to be readjusted slightly during this step. Secure the position indicator with the thumbscrew, avoiding excessive tightening torque to prevent the housing from deforming. 6. Place the handwheel onto the spindle and fix in place with the thumbscrew. 7. Check by turning the handwheel to ensure that the starting position of the spindle and the 0-position of both pointers coincide. If necessary, take out and readjust the position indicator. 1.4 Adjusting, Positioning, Locking with and without Position Indication | Page 393
2210 Pages | Valable jusqu’au 12/2026 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
