Ganter Norm Standard Parts - Catalogue Page 1645
Offre client commercial**Meilleures ventes de Ganter Norm
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Universal Joints with Friction Bearing, Type EG Determining the Size The graph shows the transferable performance N and the torques M of universal joints DIN 808, type EG (single jointed, friction bearing) in relation to the RPM n. The values are applicable to a steady RPM, a steady load and an inclination angle of max. 10°. They are not applicable to stainless steel universal joints. For larger inclination angles ß, a nominal performance N increased by the correction coefficient k and/or a nominal torque M has to be selected (see example below). Conversion formulae: Torque M [Nm] Performance N [kW] = 1 kW = 1.36 PS N [kW] = 9550 n [min-1] M [Nm] x n [min-1] 9550 1 PS = 0.736 kW Example 1 Performance N to be transferred RPM n Inclination angle ß = 0.65 kW = 230 min -1 = 10° Correction coefficient k =1 Indicative performance N = Nominal performance N Intersection point P results from 0.65 kW and 230 min-1 (which corresponds to a torque of 27 Nm). The next larger universal joint corresponding to point P is the model with a diameter d1 = 25 mm. Example 2 Torque M to be transferred RPM n Inclination angle ß = 27 Nm = 230 min-1 = 30° Correction coefficient k = 2.25 Indicative torque M = 2.25 x 27 Nm = 60 Nm Intersection point P1 results from 61 Nm and 230 min-1 (which corresponds to an indicative performance N = 1.47 kW). The next larger universal joint corresponding to point P1 is the model with a diameter d1 = 36 mm. Page 1644 | 3.6 Moving, Transferring, Connecting with Shafts and Joints
2210 Pages | Valable jusqu’au 12/2026 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
