fischer facade systems catalogue Page 105
Offre client commercial**Meilleures ventes de Fischer
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Basics · undercut anchors Earthquake-proof façade systems. The FZP II also proves its worth in situations with the highest demands on the fixing system. Earthquake tests in Shanghai, China, impressively confirmed the outstanding performance of the undercut anchor. The various façade materials mounted with the FZP II withstood accelerations of up to 9.5 m/s2. This corresponds to forces that cause considerable damage and destruction even in modern buildings designed for earthquakes. These results have been confirmed by repeated tests in Italy and France. 6 Various anchor types and installation methods. There are two different installation methods for the fischer Zykon panel anchor FZP II: Flush installation For flush installation, the installed anchor is flush with the back of the panel. The back of the panel is used as a reference for the constant drill hole depth. Flush installation of a fischer Zykon panel anchor FZP II. Calibrated front level of the subframe konst. konst. Stand-off installation Thanks to the stand-off installation, the panel thickness tolerances that occur with natural stone panels can can be compensated. With this type of installation the the constant distance between the bottom of the drill hole and the front side of the panel, the remaining wall thickness (RWD), are used as the reference dimension. As a result, the drill hole depth becomes variable. Thanks to the use of the stand-off anchors the panel thickness tolerances can thus be compensated. This type of fixing is used, for example, for façade panels with panel thickness tolerances. hv1 hv2 RWD Panel thickness tolerance is compensated by adjusted drill hole depth Visible façade (panel front side) Stand-off installation of a fischer Zykon panel anchor FZP II SO. 105
122 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
