fischer ETICS-Fixings EWI catalogue Page 25
Offre client commercial**Meilleures ventes de Fischer
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Screw fixings termoz CS 8 DT 110V The recessed ETICS screw fixing for soft insulating boards Installation of mineral wool insulation boards on concrete Countersunk installation in mineral wool insulation boards BUILDING MATERIALS APPROVALS ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 3 22 Building material classes A, B, C, D, E Concrete Concrete (weather shell) Building brick Solid sand-lime brick Hollow blocks made from lightweight concrete Vertically perforated brick Perforated sand-lime brick Lightweight aggregate concrete Aerated concrete ADVANTAGES APPLICATIONS FUNCTIONING ▪ Pre-assembled fixing with a 110 mm disc for countersunk mounting. ▪ The compound screw minimises the thermal bridge, thus there are no fixing marks on the façade. ▪ Recessed installation with round cap provides a smooth surface for thinner render layer. ▪ Less drill wear due to minimum installation depth of 35 mm in the substrate. ▪ With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render. ▪ Attachment of ETICS insulating boards on concrete and masonry ▪ Flush installation of insulation materials such as mineral wool panels ▪ Standard embedment depth for all building materials ▪ Fast setting with a standard hammer drill or cordless screwdriver. ▪ Easily recessed installation with the installation tool termoz CS. ▪ The fixing is pushed through the insulation into the drill hole and needs to be screwed tightly. ▪ For recessed installation, the insulation disc has to be covered with a round plug. ▪ The installation is completed when the disc is flush with the insulation panel. ▪ For the length of 250 mm the optional provided bits T25 are needed.
71 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
