fischer ETICS-Fixings EWI catalogue Page 21
Offre client commercial**Meilleures ventes de Fischer
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Screw fixings termoz CS 8 The economic screw fixing for all ETICS insulation materials Countersunk installation Polystyrene rigid foam boards O35 on perforated sand-lime brick BUILDING MATERIALS APPROVALS ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 3 18 Building material classes A, B, C, D, E Concrete Concrete (weather shell) Building brick Solid sand-lime brick Hollow blocks made from lightweight concrete Vertically perforated brick Perforated sand-lime brick Lightweight aggregate concrete Aerated concrete ADVANTAGES APPLICATIONS FUNCTIONING ▪ Compound screw minimises the thermal bridge, thus there are no fixing marks on the façade. ▪ Recessed installation with round cap provides a smooth surface for thinner render layer. ▪ Less drill wear and drill time due to minimum installation depth of 35 mm in the substrate. ▪ With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render. ▪ While flush installation the anchor washer can be combined with larger insulation disc DT 90, DT 110 and DT 140 for very soft insolation materials. ▪ For insulation material thicknesses up to 340 mm. ▪ Standard embedment depth for all building materials. ▪ Attachment of ETICS insulating boards on concrete and masonry ▪ Flush installation in all conventional insulation materials ▪ Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels ▪ The fixing is pushed through the insulation into the drilled hole and is screwed tight. ▪ For recessed installation, you require the installation tool termoz CS. ▪ Optionally, the installation tool termoz CS can also be used for flush installation by turning the disc. ▪ For recessed installation, the insulation disc is to be covered with a round plug. ▪ When using the installation tool, the installation is completed when the stop disc is flush with the insulation panel. ▪ For lengths from 250 mm the optional supplied bits T 25 are required.
71 Pages | Valable jusqu’au 12/2025 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
