Eurotec catalogue fastening technology Page 23
Offre client commercial**Meilleures ventes de Eurotec
Deck construction and landscaping garapa low (Apuleia spp.) medium high BULK DENSITY COMPRESSIVE STRENGTH General details: • origin: South America, trade name encompasses various species • Colour: Honey yellow, later darkening to yellowish brown or golden brown • Durability class: Varies between 1 and 3 • Properties: Moderate to high swelling and shrinkage, satisfactory to moderate dimensional stability, plain, homogeneous texture. DEFLECTION RESISTANCE Application: Deck construction, furniture, window frames E-MODULUS HARDNESS Installation instructions: • Centre distance in substructure: max. 60 cm • Joint width between the boards: 6 to 10 mm • Spacing between the butt joints: 3 to 4 mm DURABILITY DIMENSIONAL STABILITY + High durability (variable) + High strength + Very high hardness – Possible erosion of constituent substances in the timber – often originates from overexploitation (use only certified timber wherever possible) – moderate dimensional stability Douglas Fir low Fastening recommendation: For timbers with high wood density and/or moderate dimensional stability, direct fastening of the boards is preferable to hidden. This applies above all to board thicknesses > 25 mm. For direct fastening, use Terrassotec A4 5,5 mm or Profile drilling screw A4 5,5 mm for Eurotec aluminium profiles. It is always advisable to drill a pilot hole with a drill stop. (Pseudotsuga menziesii) medium high BULK DENSITY COMPRESSIVE STRENGTH General details: • origin: North America, also cultivated in Europe since the 19th century • Colour: Light yellowish brown to red brown, resembles European Larch. • Durability class: 3–4 • Properties: High elasticity, low swelling and shrinkage, good dimensional stability, low resin content, fine texture. DEFLECTION RESISTANCE Application: Deck construction, façades, solid-wood floorboards, window frames, fencing, approved structural timber, sometimes used as a substitute for tropical timber. E-MODULUS HARDNESS DURABILITY Installation instructions: • Centre distance in substructure: max. 60 cm • Joint width between the boards: 6 to 8 mm • Spacing between the butt joints: 3 to 4 mm DIMENSIONAL STABILITY + + + + Low swelling and shrinkage good dimensional stability approved structural timber Substitute for tropical timber + Largely sourced from sustainable forestry Cumarú low – resin bleed possible – moderate durability but sufficient for deck construction – moderate hardness (Dipteryx spp.) medium high BULK DENSITY COMPRESSIVE STRENGTH DEFLECTION RESISTANCE E-MODULUS General details: • origin: Northern South America, trade name encompasses various species • Colour: From yellowish to red to violet brown, later darkening to yellowish brown to olive brown • Durability class: 1 • Properties: High swelling and shrinkage, good to satisfactory dimensional stability, extremely high strength, very high hardness, homogeneous texture. Application: Deck construction, floors subject to heavy loads, structural timber, sometimes used in water engineering. HARDNESS DURABILITY DIMENSIONAL STABILITY + Very high durability + Extremely high strength + Very high hardness Fastening recommendation: For direct fastening: Terrassotec, hardened stainless steel, 5,0 and 5,5 mm; Hapatec, hardened stainless steel, 5,0 mm; or Profile drilling screw, hardened stainless steel, 5,5 mm for Eurotec aluminium profiles. It is always advisable to drill a pilot hole with a drill stop (risk of splintering). – Possible erosion of constituent substances in the timber – often originates from overexploitation (use only certified timber wherever possible) – moderate dimensional stability Installation instructions: • Centre distance in substructure: max. 60 cm • Joint width between the boards: 6 to 8 mm • Spacing between the butt joints: 3 to 4 mm Fastening recommendation: For timbers with high wood density and/or moderate dimensional stability, direct fastening of the boards is preferable to hidden. This applies above all to board thicknesses > 25 mm. For direct fastening: Terrassotec A2 5,5 mm or Profile drilling screw A4 5,5 mm for Eurotec aluminium profiles. It is always advisable to drill a pilot hole with a drill stop. 23
444 Pages | Valable jusqu’au 12/2024 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.