Eurotec catalogue fastening technology Page 224
Offre client commercial**Meilleures ventes de Eurotec
Timber engineering When analysed, the minimum distances for KonstruX screws in pre-drilled holes that are loaded in a crosswise direction are as follows according to the position of the direction of the grain Minimum distances for KonstruX screws in pre-drilled holes that are loaded in a crosswise direction with a force / fibre angle of 0° and 90° Force / fibre angle α = 0° Force / fibre angle α = 90° Axial distance parallel to the direction of the grain a1 [mm] 5∙d 33 4∙d 33 Axial distance perpendicular to the direction of the grain a2 [mm] 3∙d 20 4∙d 33 Distance from the centre of gravity of the screw area driven into the wood from the unloaded end of the end grain a3,c [mm] 7∙d 46 7∙d 46 Distance from the centre of gravity of the screw area driven into the wood from the loaded end of the end grain a3,t [mm] 12 ∙ d 78 7∙d 46 Axial distance perpendicular to the unloaded edge a4,c [mm] 3∙d 20 3∙d 20 Axial distance from the loaded edge a4,t [mm] 3∙d 20 7∙d 46 When analysed, the minimum distances for KonstruX in non-pre-drilled holes, loaded in a crosswise direction, are as follows according to the position of the direction of the grain Minimum distances for KonstruX screws in non-pre-drilled holes that are loaded in a crosswise direction with a force / fibre angle of 0° and 90° Force / fibre angle α = 0° 224 Force / fibre angle α = 90° Axial distance parallel to the direction of the grain a1 [mm] 12 ∙ d 78 5∙d 33 Axial distance perpendicular to the direction of the grain a2 [mm] 5∙d 33 5∙d 33 Distance from the centre of gravity of the screw area driven into the wood from the unloaded end of the end grain a3,c [mm] 10 ∙ d 65 10 ∙ d 65 Distance from the centre of gravity of the screw area driven into the wood from the loaded end of the end grain a3,t [mm] 15 ∙ d 98 10 ∙ d 65 Axial distance perpendicular to the unloaded edge a4,c [mm] 5∙d 33 5∙d 33 Axial distance from the loaded edge a4,t [mm] 5∙d 33 10 ∙ d 65
444 Pages | Valable jusqu’au 12/2024 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.