Bosch High-frequency production tools professional blue Page 53
Offre client commercial**Meilleures ventes de Bosch Blau
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
hors Expédition
Example 1 Example 3 Transfer of 4 kW, 72 V three-phase current, cos φ = 0.8 Same as Example 1, but 200 Hz three-phase current Cable length (straight): 10 m; Ascertained cable cross- at 100 m cable length. section as per Fig. 8: 2.75 mm2; Ascertained cable Ascertained cable cross-section from Fig. 8 is 27 mm2. cross-section as per Fig. 9: 4.8 mm2 (selected cross- This value must be checked according to Fig. 10. In section 6 mm2). this case, the larger cross-section of 50 mm2 must be The cable cross-section of 2.75 mm2 ascertained using selected. Fig. 8 and 9 is not sufficient; it would lead to excessive heating of the cable. There is no need to check according to Fig. 10 because the cross-section is less STRAIGHT GRINDERS Guide | High-frequency technology | 53 than 10 mm2. Example 2 Transfer of 3 kW, 220 V single-phase alternating ANGLE GRINDERS current cos φ = 0.9 Cable length (straight): 100 m; Ascertained cable cross-section as per Fig. 8: 4 mm2; Ascertained cable cross-section as per Fig. 9: 0.9 mm2. According to Fig. 8, a cross-section of 4 mm2 is required. This is authoritative because the result for the cable according to Fig. 9 is only 0.9 mm2 and there is Fig. 10 If you have any questions about high-frequency technology or about using Bosch high-frequency tools, the Bosch customer advisers with all of their know-how will be happy to help you. HIGH-FREquENCy TECHNOLOGy ACCESSORIES therefore no major risk of heating.
56 Pages | Valable jusqu’au 06/2024 | Page précédente | Page suivante
Choisissez votre langue
Probleme juridique
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Formulaire de demande de produits spéciaux
Le service d’approvisionnement ToolTeam®
Vous recherchez des produits qui figurent dans le catalogue mais ne peuvent pas être achetés directement en ligne ?Notre service d’approvisionnement se fera un plaisir de vous faire une offre individuelle et sans engagement.
