NIKO Product Catalog Cable Movement Systems Página 5
Oferta para clientes comerciales**Los mejores vendedores de NIKO Technik GmbH
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
NIKO conveyor systems for cables or hoses Control Application L c f a Power Application L c a Calculation of the Track Length (L=c+f) and number of cable trolleys CAB L E TROL LEYS AND F ES TOON SYS TEM S f The length of the track L is determined by adding the length of movement f to the closed parking distance of trolleys c (Refer to corresponding table for the dimension of the cable trolleys width). The number of cable trolleys n depends on the length of travel and on the required loop depth of cable a. The loop depth is governed by the available height between the track and any obstruction or by clients specification. Normally the loop depth is between 0,7 m to 1 m. Example: Track length L= 16 m, cable loop depth a= 0,8 m Distance between the trolleys= 2 x a = 2 x 0,8 - 1,6 m Number of the cable trolleys n = 16 m / 1,6 m = 10 trolleys, one of them being a towing trolley. The cable section depends on the necessary power supply. Large cable sections have unfavorable bending properties. In this case we recommend to distribute among multiple cables with smaller section sizes. For round cables: d min = 8 mm, d max = 60 mm (refer to table). For flat cables: (dxc) max= 200 x 50 mm (refer to table). For installations with a high speeds of motion (over 2 m per second) we recommend to use chains, in order to protect the cables. Cable Trolleys and Festoon Systems We reserve the right for technical amendments without obligation. The product pictures and drawings depicted in this catalogue do not always reflect all available sizes. Ver. March 2018 5
44 Páginas | Válido hasta 12/2024 | Página anterior | Página siguiente
Elija su idioma
Cuestiones jurídicas
El fabricante es el único responsable del contenido, el precio y los detalles de los productos y ofertas presentados en los catálogos. Sujeto a cambios técnicos y ópticos por parte del fabricante y a excepción de errores.
Formulario de pedido de productos especiales
El servicio de compras ToolTeam®
¿Busca productos que aparecen en el catálogo pero que no se pueden comprar directamente en línea?Nuestro servicio de compras estará encantado de hacerle una oferta individual y no vinculante.
