Kemmler Main Catalog Precision Tools Página 856
Oferta para clientes comerciales**Los mejores vendedores de Kemmler Präzisionswerkzeuge
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
Mounting instructions for ER-Collets per DIN STD 6499 Assembling instructions: Collet groove Insert groove of collet into eccentric ring of the clamping nut at the mark on the bottom of the nut. Push collet in the direction of the arrow until it clicks in place. Screw nut with collet onto toolholder. We recommend to tighten the nut with a torque wrench. Eccentric ring Disassembling instructions: After the nut is unscrewed from the toolholder, press on the face of the collet while simultaneously pushing sideways on the back of the collet until it disengages from the clamping nut. Improper assembly can permanently destroy the concentricity of the collet and may result in a damaged clamping nut. Note: Only mount nuts with correctly inserted collets! Never place the collet into the holder without first assembling it into the nut. Never clamp oversize tool shanks! e.g. never use a Ø 12–11 mm collet to clamp a Ø 12.2 mm shank. Rather use the next bigger collet (here Ø 13–12 mm collet). Insert tool the full length of the collet for best results if possible. However, never insert tool less than 2/3 of the collet bore length. Improper tool insertion can permanently deform the collet and will result in poor runout. Maximum torque 13 13.59 ER 16 M22 × 1,5 50 Nm ER 20 M25 × 1,5 75 Nm ER 25 M32 × 1,5 85 Nm ER 32 M40 × 1,5 105 Nm ER 40 M50 × 1,5 150 Nm ER 11 Mini M13 × 0,75 18 Nm ER 16 Mini M19 × 1 28 Nm Please observe the maximum torque indicated in the chart! K43
918 Páginas | Válido hasta 12/2025 | Página anterior | Página siguiente
Elija su idioma
Cuestiones jurídicas
El fabricante es el único responsable del contenido, el precio y los detalles de los productos y ofertas presentados en los catálogos. Sujeto a cambios técnicos y ópticos por parte del fabricante y a excepción de errores.
Formulario de pedido de productos especiales
El servicio de compras ToolTeam®
¿Busca productos que aparecen en el catálogo pero que no se pueden comprar directamente en línea?Nuestro servicio de compras estará encantado de hacerle una oferta individual y no vinculante.