Gesipa - Main Catalog Página 239
Oferta para clientes comerciales**Los mejores vendedores de Gesipa Blindniettechnik GmbH
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
DIFFERENCES Stroke- or setting-force adjustment ADVANTAGES OF STROKE SETTING Controlling the tool through stroke setting guarantees the height of the blind rivet nuts is constant after setting, regardless of any small variations in the nut or the material Infinitely variable adjustment of the set stroke Stroke setting is preferred above all by experienced users and for large series production ADJUSTING THE SET STROKE ON FIREFOX® TOOLS When using stroke setting, the setting force must first be set to maximum. WHEN IS STROKE SETTING USED? A constant set stroke should be used when a blind rivet nut size of the same length is set in unchanging material thicknesses. The set stroke corresponds to the distance the threaded mandrel is drawn into the nosepiece during the setting process and thus how far the blind rivet nut is compressed. With stroke setting, this distance can be adjusted mechanically on the riveting tool. Stroke (6) Setting is done in four steps 1. The rivet set screw with colour scale (9) must be screwed in up to the stop with the enclosed hexagon screwdriver SW 3. 2. Then press in the green release button (6) fully. 3. Adjust the set stroke according to the scale (5) by turning the stroke adjuster (4). One line on the scale equals 1 mm of set stroke. 4. Release the green release button. If the release button does (6) not latch automatically, turn the stroke until the release button (6) engages. (5) (9) (4) In contrast to the force adjustment method, blind rivet nuts of different lengths or changing material thicknesses require different set stroke settings. 7 EXAMPLES BRN M6 9x15 Rivetable material thickness 0.25 - 3.5 mm for material thickness 1 mm, the set stroke is approx. 3.0 mm for material thickness 1.5 mm, the set stroke is approx. 2.5 mm BRN PolyGrip® M6 9x18 Rivetable material thickness 0.25–6.0 mm for material thickness 1 mm, the set stroke is approx. 6.0 mm The values given are only guide values. because different settings may be required depending on the type of blind rivet nut. 237
408 Páginas | Válido hasta 07/2026 | Página anterior | Página siguiente
Elija su idioma
Cuestiones jurídicas
El fabricante es el único responsable del contenido, el precio y los detalles de los productos y ofertas presentados en los catálogos. Sujeto a cambios técnicos y ópticos por parte del fabricante y a excepción de errores.
Formulario de pedido de productos especiales
El servicio de compras ToolTeam®
¿Busca productos que aparecen en el catálogo pero que no se pueden comprar directamente en línea?Nuestro servicio de compras estará encantado de hacerle una oferta individual y no vinculante.
