Gesipa - Main Catalog Página 16
Oferta para clientes comerciales**Los mejores vendedores de Gesipa Blindniettechnik GmbH
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
TECHNICAL DATA on GESIPA® blind rivets GESIPA® BLIND RIVETS – DEFINITIONS BLIND RIVET BEFORE SETTING PROCESS (4) • (3) (5) • • (1) (2) Rivet body Mandrel • BLIND RIVET AFTER PROCESSING • (6) Mandrel head The blind rivet consists of two parts: the rivet body (1) and the mandrel (2). The rivet body consists of the setting head (3) and the shaft (4). The setting head is found on the processing side and is variable in diameter and shape. There are dome, countersunk and large flange versions. The rivet body is available in different lengths depending on the material thickness to be riveted. The rivet mandrel is used to deform the rivet body. It contains the predetermined breaking point (5) This is where the rivet mandrel breaks after the rivet has deformed. The mandrel head (6) is the remaining part of the rivet mandrel in the rivet body. The residual mandrel (7) is the part of the rivet mandrel that is disposed of from the set rivet via the blind rivet setting tool. (7) Residual mandrel BLIND RIVET – DIMENSIONS/SYMBOLS L dm D dh dk Shear loud . . . . . . Tensile loud Grip range D L dk dm dh hole Ø = dh ! 14 = Rivet body Ø = Rivet body length = Setting head Ø = Mandrel Ø = Hole Ø For the hole Ø is generally a tolerance of +0.1 / 0 to note!
408 Páginas | Válido hasta 07/2026 | Página anterior | Página siguiente
Elija su idioma
Cuestiones jurídicas
El fabricante es el único responsable del contenido, el precio y los detalles de los productos y ofertas presentados en los catálogos. Sujeto a cambios técnicos y ópticos por parte del fabricante y a excepción de errores.
Formulario de pedido de productos especiales
El servicio de compras ToolTeam®
¿Busca productos que aparecen en el catálogo pero que no se pueden comprar directamente en línea?Nuestro servicio de compras estará encantado de hacerle una oferta individual y no vinculante.
