Ganter Norm Standard Parts - Catalogue Página 1645
Oferta para clientes comerciales**Los mejores vendedores de Ganter Norm
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
Universal Joints with Friction Bearing, Type EG Determining the Size The graph shows the transferable performance N and the torques M of universal joints DIN 808, type EG (single jointed, friction bearing) in relation to the RPM n. The values are applicable to a steady RPM, a steady load and an inclination angle of max. 10°. They are not applicable to stainless steel universal joints. For larger inclination angles ß, a nominal performance N increased by the correction coefficient k and/or a nominal torque M has to be selected (see example below). Conversion formulae: Torque M [Nm] Performance N [kW] = 1 kW = 1.36 PS N [kW] = 9550 n [min-1] M [Nm] x n [min-1] 9550 1 PS = 0.736 kW Example 1 Performance N to be transferred RPM n Inclination angle ß = 0.65 kW = 230 min -1 = 10° Correction coefficient k =1 Indicative performance N = Nominal performance N Intersection point P results from 0.65 kW and 230 min-1 (which corresponds to a torque of 27 Nm). The next larger universal joint corresponding to point P is the model with a diameter d1 = 25 mm. Example 2 Torque M to be transferred RPM n Inclination angle ß = 27 Nm = 230 min-1 = 30° Correction coefficient k = 2.25 Indicative torque M = 2.25 x 27 Nm = 60 Nm Intersection point P1 results from 61 Nm and 230 min-1 (which corresponds to an indicative performance N = 1.47 kW). The next larger universal joint corresponding to point P1 is the model with a diameter d1 = 36 mm. Page 1644 | 3.6 Moving, Transferring, Connecting with Shafts and Joints
2210 Páginas | Válido hasta 12/2026 | Página anterior | Página siguiente
Elija su idioma
Cuestiones jurídicas
El fabricante es el único responsable del contenido, el precio y los detalles de los productos y ofertas presentados en los catálogos. Sujeto a cambios técnicos y ópticos por parte del fabricante y a excepción de errores.
Formulario de pedido de productos especiales
El servicio de compras ToolTeam®
¿Busca productos que aparecen en el catálogo pero que no se pueden comprar directamente en línea?Nuestro servicio de compras estará encantado de hacerle una oferta individual y no vinculante.
