AMF Catalogue Single and multiple clamping system Página 6
Oferta para clientes comerciales**Los mejores vendedores de AMF Spannsysteme
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
excluyendo el transporte
Collet attachment outside clamping No. 6375ZA Collet attachment outside clamping Collet attachment made of high-strength aluminium, hard anodised or polyamide. With locking bolt made of tempered steel, burnished. Size dia. D dia. D1 dia. D2 H H1 H2 Material [mm] [g] 567123 10 70 61 17,7 30 15 6 EN AW 7075 0,3 274 567124 20 99 90 22,7 50 25 10 EN AW 7075 0,3 935 550278 20 99 90 22,7 50 25 10 Polyamid 1,0 360 Order no. Clamping stroke Ø Weight Design: Collet attachments are always supplied with locking bolt. Application: The collet attachment is fastened using fastening kit 6375BA (observe torque specifications) on the base element 6375M. To secure the workpiece contour, the collet attachment must be clamped with the locking bolt. Then the workpiece contour is milled into the collet attachment with a minimum clamping depth of 2 mm. Then the locking bolt is removed, and the workpiece can be clamped. The collet attachment can be milled off to a height of H1, allowing new workpiece contours to be introduced. The maximum workpiece diameter is specified in the table with D1. Advantage: - Clamping of delicate and thin-walled workpieces - Free-form clamping - The workpiece is clamped without distortion due to the radially even clamping force imposed on it - Multiple insertion of different workpiece contours possible Note: The collet attachment must always be clamped with the workpiece or locking bolt. To remove the vertical play between the collet attachment and base element, light pretensioning must be applied by actuating the clamping stud after the workpiece is inserted. Subject to technical alterations. 6 Single and multiple clamping SyStemS ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-0 ∙ Web: www.amf.de
64 Páginas | Válido hasta 12/2024 | Página anterior | Página siguiente
Elija su idioma
Cuestiones jurídicas
El fabricante es el único responsable del contenido, el precio y los detalles de los productos y ofertas presentados en los catálogos. Sujeto a cambios técnicos y ópticos por parte del fabricante y a excepción de errores.
Formulario de pedido de productos especiales
El servicio de compras ToolTeam®
¿Busca productos que aparecen en el catálogo pero que no se pueden comprar directamente en línea?Nuestro servicio de compras estará encantado de hacerle una oferta individual y no vinculante.
