zoom_in
zoom_out
fullscreen
Vigor Drive shaft press-out device, 4 and 5 holes - Number of tools: 2 V2849
Sku: T-24247
Discontinued item
done2 parts
donePressing out rusted or glued drive shafts directly on the vehicle
VIGOR drive shaft pressing device, 4 and 5 holes - Number of tools: 2 V2849
Product data
Manufacturer:
VIGOR GmbH
Condition:
NEW
Sku:
T-24247
SKU manufacturer:
V2849
GTIN Code (EAN):
4047728028493
Weight:
4,65 Kg
All information relating to products from VIGOR GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- Working time approx. 5 minutes only
For removing rusted and glued drive shafts directly on the vehicle
- For passenger cars with T4 and 5-hole wheel hubs due to oval holes for wheel bolts
- Prevents heating, splitting of the drive shaft or damage to other parts
Application:
- Screw the wheel hub on with the vehicle wheel nuts
- Remove the drive shaft with a 18 tonne or 22 tonne hydraulic cylinder. (The installation of the impact body enables additional force by using a hammer)
- Removal of the wheel hub with sliding hammer V2922 and adapter V2872
- Arbeitszeit nur circa 5 Minuten.
- Auspressen von verrosteten oder geklebten Antriebswellen direkt am Fahrzeug.
- Für Pkw mit T?4- und 5-Loch-Nabe durch ovale Löcher für Radschrauben.
- Vermeidet Erwärmung, Beschädigung der Antriebswelle oder Schäden an anderen Teilen.
- Anwendung Nabe mit Radschrauben des Fahrzeugs verschrauben.
- Antriebswelle mit 18 Tonnen oder 22 Tonnen Hydraulikzylinder auspressen. (Montage des Schlagkörpers ermöglicht zusätzliches Kraftaufbringen über Einsatz eines Hammers).
- Herausziehen der Radnabe mit Schlagauszieher V2922 und Adapter V2872. Aufbau AntriebswelleDie Antriebswelle hat die Funktion das abgegebene Drehmoment des Motors und des Getriebes, über die Radlager auf die Räder zu transportieren. Dies muss gleichmäßig und ohne Drehzahlschwankungen funktionieren. Eine Antriebswelle ist durch die zwei Faltenbälge an den Enden zu erkennen. Einer führt zur Radmitte, der andere zum Differenzialausgang. Raus damit: - Schadensursachen und Gründe für den Ausbau
- Altersbedingter Verschleiß, welcher sich häufig in Form von Knackgeräuschen bei Kurvenfahrten, bemerkbar macht. Defekte Achsmanschetten führen dazu, dass Wasser und Verschmutzungen das Gelenk beschädigen.
- Unsachgemäßer Einbau.
- Verbundarbeiten, bei Reparaturen an Kupplung oder Getriebe.
- Bei Frontantrieblern beschädigen „Kavalierstarts“ bei eingeschlagener Lenkung die Antriebswelle.
- Leichter und schneller Ausbau bei verrosteten Antriebswellen.
- Leichter und schneller Ausbau bei geklebten Antriebswellen.
- Korrosion durch Salz erfordert hohe Kräfte beim Ausbau. Antriebswelle 4-Loch ? Lochkreis 92 – 120 mm V3147 ? V3148.
Additional information
Hydraulic cylinder:
V2854
Number of tools:
2Stück
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-32%
Hexagon T-handle screwdriver - hexagon socket profile - 5
V2505
€4.08
€6.01 MSRP
-33%
Hexagon socket screwdriver insert, for hexagon socket profile V2085 - hollow square 12.5 mm (1/2 inch) - hexagon socket profile - 12 - total length: 140 mm
V2085
€6.68
€10.00 MSRP
-35%
Socket wrench insert - square hollow 10 mm (3/8 inch) - outside hexagon profile - 14
V2270N
€2.94
€4.50 MSRP
-31%
Multi-profile socket wrench insert - square hollow 6.3 mm (1/4 inch) - multi-profile - 9
V1982
€2.39
€3.49 MSRP
-33%
RIBE screwdriver insert
V2221
€6.68
€10.00 MSRP
-46%
Digital multimeters
V4324
€20.46
€37.98 MSRP
Pullbell No. 1
V4159
€20.29
-14%
Soft foam insert, empty
V6813-L
€43.82
-37%
Hexagon socket wrench screwdriver set - Number of tools: 6
V4199
€36.97
€58.99 MSRP
-33%
Release lever and clip releaser, narrow, angled on one side - 210 mm
V2495
€5.67
€8.49 MSRP
-14%
Rigid spool - 240 mm
V4891-7
€56.13
-32%
Nozzle adjuster with magnet
V6468
€10.84
€16.01 MSRP
Impact extractor
V4154
€54.19
-5%
Single cable release 20
V4451-20
€10.46
-36%
UNIVERSAL SCRAPER V1368N
V1368N
€7.73
€12.01 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Vigor Drive shaft press-out device, 4 and 5 holes - Number of tools: 2 V2849
Vigor GmbH
VIGOR
V2849
4047728028493
drive shaft pressing device
4- and 5-hole number of tools: 2
drive shaft tool
chassis tool
1090-30
V2849
- Working time approx. 5 minutes only
For removing rusted and glued drive shafts directly on the vehicle
- For passenger cars with T4 and 5-hole wheel hubs due to oval holes for wheel bolts
- Prevents heating, splitting of the drive shaft or damage to other parts
Application:
- Screw the wheel hub on with the vehicle wheel nuts
- Remove the drive shaft with a 18 tonne or 22 tonne hydraulic cylinder. (The installation of the impact body enables additional force by using a hammer)
- Removal of the wheel hub with sliding hammer V2922 and adapter V2872