Twist drill DIN 338 TypeN D.1,6mm HSS profile-sl.TiN cyl.shank 5xD right.RUKO 250016T

HSS - TiN-coated - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - achieves long tool life with increased cutting values - for steel, alloyed and unalloyed cast steel (only conditionally suitable up to 1100 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - Powerful twist drill, suitable for all normal drilling work in common materials Other technical properties: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.04 mm/rev - Quality: profile-ground Other sizes available on request. for steel, alloyed and unalloyed cast steel (only suitable to a limited extent up to 1100 N/mm² strength), grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze