Slide channel G-EMR for TS 93 white 9016 e-mech.DORMAKABA 64070011

with lever - for TS 93 B and G - enables precise hold-open of fire and smoke protection doors - can be monitored and controlled completely independently of other systems - the hold-open point can be set to an opening angle between approx. 80° and 140° - note: hold-open point is also max. door opening angle, set door stopper - in the event of an alarm or power failure, the hold-open is cancelled and the door is closed by the door closer - the hold-open can also be released manually without any problems thanks to the adjustable release force (no tools required) - incl. lever, slide channel, electromechanical door closer - the hold-open can be set to a maximum opening angle between approx. 80° and 140°. Lever, slide channel, electromechanical hold-open unit, smoke detector, power supply unit, panelling, fixing screws and end caps - Can be used for both DIN-L and DIN-R doors - Supply voltage 230 V AC - Operating voltage 24 V DC - Rated output power 9, 8 W - Duty cycle 100 % ED - Connection options for additional detectors and external manual release as well as a potential-free alarm contact are also available - For particularly large and heavy doors (over 1250 mm) or doors where the hold-open point should be over 120°, we recommend using DORMA EM holding magnets in conjunction with the DORMA RMZ smoke detection control panel instead of the EMF Other technical features: - max. Door width: 1600mm Supplied without door closer - please order separately