home
Brands
Ruko
All categories of Ruko
Ruko Universal solid tungsten carbide end mill cutter type N TiAIN coated 820100HM

Ruko Universal solid tungsten carbide end mill cutter type N TiAIN coated 820100HM Thumbnail

Ruko Universal solid tungsten carbide end mill cutter type N TiAIN coated 820100HM

Sku: T-20109

Discontinued item

Product variants

Sku:	Name:	SKU manufacturer:
T-20106	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820050HM
T-20107	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820060HM
T-20108	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820080HM
T-20110	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820120HM
T-20111	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820140HM
T-20112	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820160HM
T-20113	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820180HM
T-20114	Universal solid tungsten carbide end mill cutter type N TiAIN coated	820200HM
T-20177	Universal solid tungsten carbide end mill cutter type N TiAIN coated	840060HM

Surface: TiAlN beschichtet
Total length: 66mm

Cutting: 2 Schneiden
twist angle: 30°

Universal solid carbide end mill type N TiAlN coated

Product data

Manufacturer:

Ruko GmbH

Condition:

NEW

Sku:

T-20109

SKU manufacturer:

820100HM

GTIN Code (EAN):

4007140156839

Weight:

0,08 Kg

All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved. This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.

Product description

Ø 10,0 mm - DIN 6527K - two edge cutter - short model without flat - Stable universal end mill cutter, with large flutes for optimal chip removal. Suitable for dipping. For finish milling and flute milling.; The new RUKO finest grain high-performance end mill cutters in combination with a TiAlN wear-protection coating offer maximum cutting edge stability and a high thermal load capacity of the cutting at the same time.; The TiAlN coating increases the surface hardness of the cutter to about 3000 HV and the surface heat resistance to about 900°.; Compared to the HSS end mill cutter, the cutting speed is two to four times higher. An essentially smoother cutting process is obtained and a better surface finish of the workpiece at the same feed rate.; The productivity clearly increases through the distinctly higher service life and the higher cutting speed of the universal solid tungsten carbide end mill cutter.; Product Application:; Suitable for milling or drilling of steel, steel casting up to 1200 N/mm², gray cast iron, chilled casting, malleable cast iron, CrNi steels, bronze, brass, copper, aluminum with high silica content and abrasive plastics. The TiAlN coating increases durability and cutting values by 50%.; DIN 6535 HA = cylindrical shaft without slot.; DIN 6535 HB = cylindrical shaft with slot.; Shank according to DIN 6535 HA; DIN 6528* = only in Ø 5,0 mm.

Additional information

Surface:

TiAlN beschichtet

Total length:

66mm

Cutting:

2 Schneiden

twist angle:

30°

Cutting length:

11mm

Shaft Ø:

10,0mm

Execution:

kurz, ohne Nut

Shaft according to DIN:

6535 HA

Related results

4007140156839 820100 HM 820100-HM RUKO 820 100 HM Universal solid carbide end mill solid carbide RUKO precision tools 820100HM precision tools twist drills special drills sheet metal cone drills step drills conical and deburring countersinks thread cutting tools thread repair tools core drills milling pins hole saws saws deburring program screw hole punches coolants and lubricants concrete drills wood drills

Complete catalogs

The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.

Ruko main catalogue precision tools

324 Pages (PDF)
Commercial customer offer**

RUKO catalogue Core drilling technology

52 Pages (PDF)
Commercial customer offer**

RUKO oil change program

20 Pages (PDF)
Commercial customer offer**

Ruko ULTIMATECUT line catalog

28 Pages (PDF)
Commercial customer offer**

Matching catalog

Commercial customer offer**

Product suggestions

-63%

Core drill HSS-TiAlN with weldon shank (3/4”). Ø 50 mm

Twist drill DIN 338 type N HSS G

Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 27 mm

Short step drill bit type N HSS 180° medium grade for through hole

Twist drill DIN 345 type N HSS

Hand tap MF DIN 2181 HSS. Taper tap, ground MF 30

Jobber length type N HSS Co 5

HSS-G hole saw Ø 40 mm

Machine tap M DIN 371 HSS Co 5, ground M 8 type C / 35°

Core drill set TiALN 7 pcs.

Twist drill DIN 338 type VA HSSE Co 8 TiAlN

Hand tap M DIN 352 HSS final tap, ground M 3

UC TAPPER 4S HSS RUnaTEC 90°, 31.0 MM 3FL.

Twist drill DIN 338 type N HSS G

UC step drill FLOWSTEP TIP HSS, spiral fluted size 3, 9-38mm

101653

€59.24

€156.39 MSRP

No Review yet

Description: No Review yet Written by: No Review Rating: 5 out of 5 5 stars, based on 1 reviews Ruko Universal solid tungsten carbide end mill cutter type N TiAIN coated 820100HM 4007140156839 820100 HM 820100-HM RUKO 820 100 HM Universal solid carbide end mill solid carbide RUKO precision tools 820100HM precision tools twist drills special drills sheet metal cone drills step drills conical and deburring countersinks thread cutting tools thread repair tools core drills milling pins hole saws saws deburring program screw hole punches coolants and lubricants concrete drills wood drills Ø 10,0 mm - DIN 6527K - two edge cutter - short model without flat - Stable universal end mill cutter, with large flutes for optimal chip removal. Suitable for dipping. For finish milling and flute milling.; The new RUKO finest grain high-performance end mill cutters in combination with a TiAlN wear-protection coating offer maximum cutting edge stability and a high thermal load capacity of the cutting at the same time.; The TiAlN coating increases the surface hardness of the cutter to about 3000 HV and the surface heat resistance to about 900°.; Compared to the HSS end mill cutter, the cutting speed is two to four times higher. An essentially smoother cutting process is obtained and a better surface finish of the workpiece at the same feed rate.; The productivity clearly increases through the distinctly higher service life and the higher cutting speed of the universal solid tungsten carbide end mill cutter.; Product Application:; Suitable for milling or drilling of steel, steel casting up to 1200 N/mm², gray cast iron, chilled casting, malleable cast iron, CrNi steels, bronze, brass, copper, aluminum with high silica content and abrasive plastics. The TiAlN coating increases durability and cutting values by 50%.; DIN 6535 HA = cylindrical shaft without slot.; DIN 6535 HB = cylindrical shaft with slot.; Shank according to DIN 6535 HA; DIN 6528* = only in Ø 5,0 mm. T-20109 820100HM 4007140156839 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/ruko-universal-solid-tungsten-carbide-end-mill-cutter-type-n-tiain-coated-820100hm-t-20109-4007140156839?dc=GB&cu=EUR 2026-09-15 25.45 United Kingdom GB DE 14

Last searches

Frequent searches

All categories

Ruko Universal solid tungsten carbide end mill cutter type N TiAIN coated 820100HM

Product variants

Product data

Product description

Additional information

Related results

Complete catalogs

Matching catalog

Product suggestions