zoom_in
zoom_out
fullscreen
-56%
Ruko Screw-hole punch with three-point cutting tip 109400
Sku: T-13454
Discontinued item
€33.03 (excl. legal VAT, excl. Shipping)
€74.75 MSRP
In stock,ready for shipping within 48h
Piece
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-13386 | Screw-hole punch with three-point cutting tip | 109127 | |
|
T-13388 | Screw-hole punch with three-point cutting tip | 109152 | |
|
T-13390 | Screw-hole punch with three-point cutting tip | 109160 | |
|
T-13392 | Screw-hole punch with three-point cutting tip | 109165 | |
|
T-13396 | Screw-hole punch with three-point cutting tip | 109180 | |
|
T-13398 | Screw-hole punch with three-point cutting tip | 109186 | |
|
T-13400 | Screw-hole punch with three-point cutting tip | 109190 | |
|
T-13402 | Screw-hole punch with three-point cutting tip | 109200 | |
|
T-13405 | Screw-hole punch with three-point cutting tip | 109204 | |
|
T-13407 | Screw-hole punch with three-point cutting tip | 109210 | |
|
T-13409 | Screw-hole punch with three-point cutting tip | 109220 | |
|
T-13411 | Screw-hole punch with three-point cutting tip | 109225 | |
|
T-13413 | Screw-hole punch with three-point cutting tip | 109230 | |
|
T-13415 | Screw-hole punch with three-point cutting tip | 109240 | |
|
T-13417 | Screw-hole punch with three-point cutting tip | 109250 | |
|
T-13419 | Screw-hole punch with three-point cutting tip | 109254 | |
|
T-13421 | Screw-hole punch with three-point cutting tip | 109260 | |
|
T-13423 | Screw-hole punch with three-point cutting tip | 109270 | |
|
T-13425 | Screw-hole punch with three-point cutting tip | 109283 | |
|
T-13427 | Screw-hole punch with three-point cutting tip | 109290 | |
|
T-13429 | Screw-hole punch with three-point cutting tip | 109300 | |
|
T-13432 | Screw-hole punch with three-point cutting tip | 109305 | |
|
T-13434 | Screw-hole punch with three-point cutting tip | 109310 | |
|
T-13436 | Screw-hole punch with three-point cutting tip | 109320 | |
|
T-13438 | Screw-hole punch with three-point cutting tip | 109325 | |
|
T-13440 | Screw-hole punch with three-point cutting tip | 109330 | |
|
T-13442 | Screw-hole punch with three-point cutting tip | 109340 | |
|
T-13444 | Screw-hole punch with three-point cutting tip | 109350 | |
|
T-13446 | Screw-hole punch with three-point cutting tip | 109360 | |
|
T-13448 | Screw-hole punch with three-point cutting tip | 109370 | |
|
T-13450 | Screw-hole punch with three-point cutting tip | 109380 | |
|
T-13456 | Screw-hole punch with three-point cutting tip | 109405 | |
|
T-13460 | Screw-hole punch with three-point cutting tip | 109420 | |
|
T-13462 | Screw-hole punch with three-point cutting tip | 109430 | |
|
T-13466 | Screw-hole punch with three-point cutting tip | 109450 | |
|
T-13470 | Screw-hole punch with three-point cutting tip | 109470 | |
|
T-13476 | Screw-hole punch with three-point cutting tip | 109500 | |
|
T-13478 | Screw-hole punch with three-point cutting tip | 109505 | |
|
T-13480 | Screw-hole punch with three-point cutting tip | 109510 | |
|
T-13484 | Screw-hole punch with three-point cutting tip | 109530 | |
|
T-13486 | Screw-hole punch with three-point cutting tip | 109540 | |
|
T-13488 | Screw-hole punch with three-point cutting tip | 109550 | |
|
T-13490 | Screw-hole punch with three-point cutting tip | 109600 | |
|
T-13492 | Screw-hole punch with three-point cutting tip | 109615 | |
|
T-13494 | Screw-hole punch with three-point cutting tip | 109635 |
donePunch thin-walled materials quickly, effortlessly, cleanly and burr-free in just a few simple steps.
Punch holes in thin-walled materials quickly, effortlessly, cleanly and burr-free in just a few easy steps. Particularly suitable for use with wrenches, hand hydraulic punches or foot hydraulic punches.
Content:
1 Piece
Shipping:
€41.93 Versandservice to United Kingdom
plus €7.80 stock transfer surcharge
For orders under €84.03 order total plus €25.21 Surcharge
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-13454
SKU manufacturer:
109400
GTIN Code (EAN):
4007140009043
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 40,0 mm. Suitable for sheet steel, stainless-steel sheets, non ferrous and light metals, plastics. - Cuts holes in thin materials quickly, easily, cleanly and without burrs in a few simple operations.; Suitable for sheet steel, stainless-steel sheets, non-ferrous and light metals, plastics. Ideal for switchgear manufacturers, electricians, plumbers, industry and handicrafts.
- Screw hole punch with 3-point cut
- Punch: 3-point cut
- Material: special steel
- Pull screw: metric fine thread
- from MF 10. Suitable for sheet steel
- Stainless steel sheets
- Non-ferrous and light metals
- Plastics. Ideal for
- Punch thin-walled materials quickly, effortlessly, cleanly and burr-free in just a few easy steps.
- Better support thanks to 3-point cut, resulting in less deformation of the punched-out parts. This prevents damage to the pull screw.
- The ball bearing makes handling even easier and faster. The effort required is reduced by approx. 67%.
- Before using the screw hole punch, the pull screw should be lubricated with RUKO cutting spray or cutting paste.
- The metric pull screws of the RUKO screw hole punches are of the highest quality and are therefore designed for extreme loads. If lost, they can also be replaced with standard metric fine thread screws for short-term use.
- Particularly suitable for use with wrenches, hand hydraulic punches or foot hydraulic punches.
- Special sizes are available on request.
Additional information
Diameter:
40,0 mm
Cutting number:
3
Material:
Spezial-Profilstahl
Material thickness:
bis 4mm
Screw plug:
MF 12
Stamp:
3-Punkt-Anschnitt
Coating:
Schwarzoxidierte Oberfläche
Width (mm):
75 mm
Thread designation size M:
M 40
Thread designation MF:
MF 12
Length (mm):
50 mm
Net weight:
0,42 kg
Related results
4007140009043
RUKO
109 400
screw hole punch
RUKO precision tools
109400
precision tools
twist drills
special drills
sheet metal cone drills
step drills
conical and deburring countersinks
thread cutting tools
thread repair tools
core drills
milling pins
hole saws
saws
deburring program
screw hole punches
coolants and lubricants
concrete drills
wood drills
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-56%
Screw-hole punches with three-point cutting tip and ball bearing
109152K
€26.81
€60.67 MSRP
-60%
Twist drill DIN 338 type N HSS ground
214025B
€0.42
€1.05 MSRP
-56%
Step drill HSS-TiN, inch size, ground with split point
101708T
€45.17
€102.26 MSRP
-62%
Round dies DIN EN 22568 HSS, ground MF 22 - 1,5
239220
€19.32
€51.00 MSRP
-66%
Core drill with tungsten-carbide and Quick IN-shank. Ø 65 mm
1081165
€133.19
€397.02 MSRP
-52%
Twist drill DIN 338 type N HSS G
214042LI
€2.27
€4.75 MSRP
-42%
Twist drill DIN 338 type VA D.1,5mm HSS-Co 5 cyl.shank 5xD re.RUKO
536015
€2.09
€3.61 MSRP
-51%
Hand tap M DIN 352 HSS, ground M 5
230050TX
€3.77
€7.69 MSRP
-58%
Twist drills DIN 345 type N HSS Co 5 ground
204185E
€25.34
€60.75 MSRP
-62%
KGB-Bit-UC-FLS-HSS-M8x1,25
270618
€11.72
€30.97 MSRP
-63%
Jobber length type N HSS Co 5 with split point
215811
€1.64
€4.45 MSRP
-62%
Core drill HSS with weldon shank (3/4”). Ø 54 mm
108254
€89.41
€237.94 MSRP
-53%
HSS-G hole saw Ø 35 mm
128035
€25.29
€54.12 MSRP
-60%
Twist drill DIN 338 type N HSS G
214054
€0.84
€2.10 MSRP
-62%
Nut tap M DIN 357 HSS ground M 12
243120
€21.09
€55.63 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Screw-hole punch with three-point cutting tip 109400
4007140009043
RUKO
109 400
screw hole punch
RUKO precision tools
109400
precision tools
twist drills
special drills
sheet metal cone drills
step drills
conical and deburring countersinks
thread cutting tools
thread repair tools
core drills
milling pins
hole saws
saws
deburring program
screw hole punches
coolants and lubricants
concrete drills
wood drills
Ø 40,0 mm. Suitable for sheet steel, stainless-steel sheets, non ferrous and light metals, plastics. - Cuts holes in thin materials quickly, easily, cleanly and without burrs in a few simple operations.; Suitable for sheet steel, stainless-steel sheets, non-ferrous and light metals, plastics. Ideal for switchgear manufacturers, electricians, plumbers, industry and handicrafts.
T-13454
109400
4007140009043
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/ruko-screw-hole-punch-with-three-point-cutting-tip-109400-t-13454-4007140009043?dc=GB&cu=EUR
2026-09-14
33.03
United Kingdom
GB
DE
14