zoom_in
zoom_out
fullscreen
Ruko Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 24 mm 1081524C
Sku: T-12736
Discontinued item
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-12726 | Core drills Tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 19 mm | 1081519C | |
|
T-12728 | Core drills Tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 20 mm | 1081520C | |
|
T-12730 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 21 mm | 1081521C | |
|
T-12732 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 22 mm | 1081522C | |
|
T-12734 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 23 mm | 1081523C | |
|
T-12738 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 25 mm | 1081525C | |
|
T-12741 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 26,5 mm | 10815265C | |
|
T-12742 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 26 mm | 1081526C | |
|
T-12745 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27,5 mm | 10815275C | |
|
T-12746 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27 mm | 1081527C | |
|
T-12748 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 28 mm | 1081528C | |
|
T-12750 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 29 mm | 1081529C | |
|
T-12752 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 30 mm | 1081530C | |
|
T-12754 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 31 mm | 1081531C | |
|
T-12756 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 32 mm | 1081532C | |
|
T-12758 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 33 mm | 1081533C | |
|
T-12760 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 34 mm | 1081534C | |
|
T-12762 | Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 36 mm | 1081536C |
doneInsert guide pin into core drill.
The RUKO core drills with Tecrona coating and carbide cutting edges can be used universally with non-hardened steels and superalloys (materials with very high alloy contents of AL, Ti, nickel such as Inconel, Husteloy, Inox). The Tecrona coating is the ideal coating for all drilling work that places extreme demands on the tool. It adheres very well to the tool, so the wear protection coating increases the surface hardness to approx. 4200 HV. The coefficient of friction with this coating is extremely low, which increases the service life with little wear.
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-12736
SKU manufacturer:
1081524C
GTIN Code (EAN):
4007140315564
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 24,0 mm. Cutting depth: 30 mm - Can be used on all track drilling machines. The cutting geometry has been specially optimized for heavy duty chip removal from railway tracks, thus makes efficient use possible.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.; Applications: ; Particularly for rail tracks, Hardox / Weldox steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.
- Tecrona core drill coated with hard metal cutting edges and Weldon shank 3/4” for railway tracks. Ø 24 mm
- Can be used on all rail drilling machines. The cutting geometry has been optimized especially for heavy-duty machining of railway tracks and thus enables economical use
- They have a drilling time that is up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Push the core drill into the holder and tighten the hexagon socket screws.
- Make sure the core drill is properly seated in the holder.
- With the EasyLock quick-release holder, the core drill is automatically locked.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to release the cut-out pieces.
- Observe the speed table and use coolant.
Additional information
Diameter:
24,0 mm
Cutting:
Hartmetall + Tecrona Beschichtung
Cutting depth:
30,0 mm
Machine:
RS5e / RS10 / RS20 / RS25e / RS30e / RS40e
Ø Weld stem:
19mm (3/4")
Shaft diameter mm (2):
19,00
Shaft diameter mm/inch/MK unit of measurement:
mm
Shaft diameter inches / MK:
3/4
Net weight:
0,09 kg
Related results
4007140315564
108152 4C
108152-4C
RUKO
108 152 4C
core drill
RUKO precision tools
1081524C
precision tools
twist drills
special drills
sheet metal cone drills
step drills
conical and deburring countersinks
thread cutting tools
thread repair tools
core drills
milling pins
hole saws
saws
deburring program
screw hole punches
coolants and lubricants
concrete drills
wood drills
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-52%
Twist drill DIN 338 type VA HSSE Co 8 TiAlN
281099EF
€15.67
€32.61 MSRP
-56%
Screw-hole punch with three-point cutting tip
109240
€17.86
€40.42 MSRP
-59%
Sheet metal peeling drill set 3-14/5-20/16-30,5mm HSS-Co5 4pcs.ABS-cup.RUKO
101020ERO/RUKO
€68.65
€168.99 MSRP
-62%
Machine tap M DIN 376 HSS Co 5-VAP M 27
233270VA
€60.88
€160.75 MSRP
-56%
Studs size 5
244005
€10.29
€23.28 MSRP
-63%
Twist drill DIN 338 type VA HSSE Co 5
215058
€1.72
€4.71 MSRP
-56%
SDS-plus hammer drill
211051
€3.07
€6.97 MSRP
-37%
Spiralbohrer D.5,5mm HSS 5xD Spiral-L.57mm RUKO
2501055T
€1.64
€2.61 MSRP
-56%
HAB-Ø18,0x450mmx400mm-SDS+4C
123182
€35.08
€79.37 MSRP
-62%
Core drill HSS-TiAlN with weldon shank (3/4”). Ø 41 mm
108541F
€104.75
€278.74 MSRP
-62%
Hand tap UNF DIN 2181 HSS, final tap, ground 5/8”
246058UNF2
€11.08
€29.29 MSRP
-60%
Short step drill bit type N HSS 180° medium grade for through hole
102628
€18.11
€44.83 MSRP
-60%
Short step drill bit type N HSS 90° for thread core hole
102636
€15.84
€39.24 MSRP
-60%
Flat countersinker DIN 373 HSS with fixed guide
102403
€8.45
€20.97 MSRP
-63%
Core drill HSS-TiAlN with weldon shank (3/4”). Ø 30 mm
1082030F
€139.29
€373.57 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drills tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 24 mm 1081524C
4007140315564
108152 4C
108152-4C
RUKO
108 152 4C
core drill
RUKO precision tools
1081524C
precision tools
twist drills
special drills
sheet metal cone drills
step drills
conical and deburring countersinks
thread cutting tools
thread repair tools
core drills
milling pins
hole saws
saws
deburring program
screw hole punches
coolants and lubricants
concrete drills
wood drills
Ø 24,0 mm. Cutting depth: 30 mm - Can be used on all track drilling machines. The cutting geometry has been specially optimized for heavy duty chip removal from railway tracks, thus makes efficient use possible.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.; Applications: ; Particularly for rail tracks, Hardox / Weldox steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.
T-12736
1081524C
4007140315564
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/ruko-core-drills-tecrona-coated-with-tungsten-carbide-cutting-edges-and-weldon-shank-for-railway-tracks-o-24-mm-1081524c-t-12736-4007140315564?dc=GB&cu=EUR
2026-09-15
49.66
United Kingdom
GB
DE
14