Rothenberger Diamond core bit DX-HIGH SPEED PLUS, 1.1/4 FF44040
doneWidth (m): 0.09
doneLength (m): 0.0565
Product data
Product description
The DX HIGH SPEED Plus diamond core bit with 1.1/4 inch UNC thread is suitable for wet and dry drilling. With a maximum usable length of 430 mm, the diamond core bit can produce holes with a diameter of 40 mm. The use of the entire diamond segment, without loss through the neutral zones, is achieved by a cold welding process based on the latest connection technology, called Space Welding. The core bit is characterized by improved drilling behavior and at the same time optimal water cooling through PRISMACUT. The precise concentricity reduces wear and the core bit cuts very well for a safe start in freehand operation.
Installers, service technicians or electricians can use the hand-held or stationary core drilling system and the DX-High Speed Plus diamond core bit to quickly and easily drill holes in reinforced concrete (wet), masonry or sand-lime brick (both dry) to a depth of 430 mm without extension.
Area of application
For drilling in reinforced concrete, masonry and sand-lime brick with a diameter of 42 mm with a usable length of 430 mm with a 1.1/4” UNC thread connection (standard).
Space Welding: Cold welding process using the latest connection technology. Use of the entire diamond segment without loss due to the neutral zone. PRISMACUT: Four drilling lenses on the diamond segment improve the drilling behavior and at the same time ensure optimal water cooling. Exact concentricity reduces wear. Very easy to cut for safe cutting in freehand operation.
- DX High Speed Plus, 1.1/4”UNC, D=40mm, NL=430mm
- ETIM Code EC000704
- eClass Code 21180144
- Class code ECLASS ADS578
- Diameter 40 mm
- Thread mount standard
- Number of segments 4
- Segment dimension width 2
- Segment dimension height 10
- Tiles No
- Granite No
- Marble Yes
- Clinker No
- Masonry Yes
- Sand-lime brick Yes
- Asphalt No
- Screed Yes
- Concrete Yes
- Heavily reinforced concrete Yes
- Usable length 430 mm
- Segment dimension 2 x 10 mm
- Speed electronics No
- Drilling range concrete 40 mm
- Drilling range masonry 40 mm
- Drilling range 40 – 40 mm
- Drilling stroke 430 mm
- Space Welding: Cold welding process using the latest joining technology. Use of the entire diamond segment without loss due to the neutral zone
- PRISMACUT: Four drilling lenses on the diamond segment improve the drilling behavior and at the same time ensure optimal water cooling
- Exact concentricity reduces wear
- Very easy to cut for safe cutting in freehand operation
Additional information
Related results
Complete catalogs
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Product suggestions
The DX HIGH SPEED Plus diamond core bit with 1.1/4 inch UNC thread is suitable for wet and dry drilling. With a maximum usable length of 430 mm, the diamond core bit can produce holes with a diameter of 40 mm. The use of the entire diamond segment, without loss through the neutral zones, is achieved by a cold welding process based on the latest connection technology, called Space Welding. The core bit is characterized by improved drilling behavior and at the same time optimal water cooling through PRISMACUT. The precise concentricity reduces wear and the core bit cuts very well for a safe start in freehand operation.
Installers, service technicians or electricians can use the hand-held or stationary core drilling system and the DX-High Speed Plus diamond core bit to quickly and easily drill holes in reinforced concrete (wet), masonry or sand-lime brick (both dry) to a depth of 430 mm without extension.
Area of application
For drilling in reinforced concrete, masonry and sand-lime brick with a diameter of 42 mm with a usable length of 430 mm with a 1.1/4” UNC thread connection (standard).
Space Welding: Cold welding process using the latest connection technology. Use of the entire diamond segment without loss due to the neutral zone. PRISMACUT: Four drilling lenses on the diamond segment improve the drilling behavior and at the same time ensure optimal water cooling. Exact concentricity reduces wear. Very easy to cut for safe cutting in freehand operation.
T-541934 FF44040 4004625440407 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/rothenberger-diamond-core-bit-dx-high-speed-plus-1-1-4-ff44040-t-541934-4004625440407?dc=GB&cu=EUR 2026-07-08 88.28 United Kingdom GB DE 14