Commercial customer offer**
RÖHM ZG 100, 3-jaws, DIN 6350, Form A, drilling and turning jaws, cast iron body 101781
Sku: T-243180
Discontinued item
doneType: 300-10
doneMat. Number: 101781
doneMat. Number: 101781
doneMade in Germany
RÖHM ZG 100, 3-jaws, DIN 6350, Form A, drilling and turning jaws, cast iron body 101781
Product data
Manufacturer:
RÖHM Spanntechnik
Condition:
NEW
Sku:
T-243180
SKU manufacturer:
101781
GTIN Code (EAN):
4019208027449
Weight:
3,10 Kg
All information relating to products from RÖHM Spanntechnik. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Lathe chuck with spiral ring ZG, size 100, 3-jaws, DIN 6350, cylindrical center mount, with drilling and turning jaws, cast body-proven lathe chuck made of special cast iron for use in areas that require high clamping forces, high concentricity and reliable long-term repeatability Universal use on lathes, rotary tables, dividing heads, etc.-Lathe chucks with spiral ring in cast design.Particularly low design with direct mounting.3-jaw and 4-jaw design.-Optimal price-performance ratioParticularly low design for minimal disruptive contoursJaws can be adjusted by turning the key using the adjust the entire clamping range. This enables workpieces with different clamping diameters to be clamped quickly. Jaws in the chuck ground out for concentricity - each with a set of one-piece drilling and turning jaws Vibration-damping body made of special cast iron Spiral ring drop-forged, balanced and hardened Special cast for use in areas that require high clamping forces, high concentricity and reliable long-term repeatability. For universal use on lathes, rotary tables, dividing heads, etc.
Customer benefits:
Optimum price-performance ratioParticularly low Design for minimal interfering contours Jaws can be adjusted over the entire clamping range by turning the key. This enables workpieces with different clamping diameters to be quickly clamped. Jaws in the chuck ground for concentricity
Technical features:
With one set each of one-piece drilling and turning jawsVibration-damping body made of special cast ironSpiral ring drop-forged, balanced and hardened
Customer benefits:
Optimum price-performance ratioParticularly low Design for minimal interfering contours Jaws can be adjusted over the entire clamping range by turning the key. This enables workpieces with different clamping diameters to be quickly clamped. Jaws in the chuck ground for concentricity
Technical features:
With one set each of one-piece drilling and turning jawsVibration-damping body made of special cast ironSpiral ring drop-forged, balanced and hardened
- Particularly successful and effective when strength is the top priority. Even large dimensions and heavy weights are firmly under control - absolutely safe!
- Röhm lathe chucks are used wherever economical and precise clamping is required.DURO wedge bar chucks and face spiral chucks (DIN 6350 and DIN 6351) are used successfully where extremely high clamping forces, high concentricity and reliable long-term repeatability are required.The three-jaw DURO wedge bar chuck is characterized by very high clamping force and accuracy, which is twice as high as required in DIN 6386.The concentricity and face accuracy of the three- and four-jaw face spiral chucks corresponds to DIN 6386, Part 1, accuracy class I.In order to machine large and heavy workpieces with the highest possible cutting performance, optimal clamping with high forces is required.Röhm face plates, up to a diameter of 4500 mm, have proven themselves to be ideal for this with their undeniable advantages.In conjunction with RÖHM clamping tools The modular palletizing system POWER GRIP creates multifunctional processing options.
- AAB827c003
- Lathe chuck with spiral ring ZG, size 100, 3-jaws, DIN 6350, cylindrical centering mount, with drilling and turning jaws, cast body
- Type 300 ZG 3-jaw cast body
- Type: 300 ZG
- Note: DIN 6350, cylindrical centering mount, form A
- Tool group: A09
Additional information
Size:
100
Tensile strength:
27
Max. speed:
4500
Mounting thread:
3xM8
Drive square:
8
Zoll:
4
Type of processing:
Drehen
Type_of_activation:
Manuell betätigt
Diameter centring:
70
Number of bakes:
3
Length cheeks:
47
DIN recording:
Zylindrische Zentrieraufnahme
Mounting hole circle:
83
Torque at the key:
60
Passage:
20
maximum passage:
21
Height Feed to Register Reverse Plate:
53.6
Height Feed to Centre Drive:
18
Height baking over feed body:
18
Height feed without baking:
50
Height with cheeks:
80.5
Depth centering:
3
Type of tension:
Werkstückspannung
Tool group No:
A09
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
Top jaws, size 254, 3-jaw set, hardenable, serration 60°
154869
€81.72
-19%
Pull-down base jaw RNG, size 3, jaw width 135, with two permanent magnets
155239
€402.61
€498.99 MSRP
Pneumatic parallel gripper RPP- LA35X22 4XM3 KH-,- BH-,-
438041
€747.35
Base jaws, size 200, 3-jaw set, hardened straight toothing
463549
€420.92
Spanneinsatz-Satz 215 Hart Dg
1388581
€338.98
-4%
Conversion kit to CAPTIS-A 42
1283257
€665.37
-4%
Safety control block Kp Leg, 230V-50Hz
437747
€5,639.16
Collet Captis GTG 32 D22.0, smooth L44
1273087
€202.26
-6%
Mounting sleeve, MK inside 5, for clamping the face driver in the lathe chuck
085035
€170.71
-4%
Collet Captis GT 100 D47.0, longitudinal and transverse grooves L59
1274357
€594.20
Clamping insert DURO-400+500NC unhardened +DURO-500NCE
141057
€294.16
-15%
MITN DISC COAE ERS.F.88544/
1341606
€93.36
-4%
Clamping set S05 D43,2 VKS
1086573
€592.27
-4%
Sleeve mandrel KFS06 without WT clamping range 44.7-55.7
599806
€874.96
-4%
Vice SSP-160/3 1/16 ZA55 OD KH24 BH4.2
161505
€4,422.90
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
RÖHM ZG 100, 3-jaws, DIN 6350, Form A, drilling and turning jaws, cast iron body 101781
300-10
RÖHM
ZG 100
3-jaws
DIN 6350
Form A
drilling and turning jaws
cast body
101781
4019208027449
clamping technology
gripping technology
Lathe chuck with spiral ring ZG, size 100, 3-jaws, DIN 6350, cylindrical center mount, with drilling and turning jaws, cast body-proven lathe chuck made of special cast iron for use in areas that require high clamping forces, high concentricity and reliable long-term repeatability Universal use on lathes, rotary tables, dividing heads, etc.-Lathe chucks with spiral ring in cast design.Particularly low design with direct mounting.3-jaw and 4-jaw design.-Optimal price-performance ratioParticularly low design for minimal disruptive contoursJaws can be adjusted by turning the key using the adjust the entire clamping range. This enables workpieces with different clamping diameters to be clamped quickly. Jaws in the chuck ground out for concentricity - each with a set of one-piece drilling and turning jaws Vibration-damping body made of special cast iron Spiral ring drop-forged, balanced and hardened Special cast for use in areas that require high clamping forces, high concentricity and reliable long-term repeatability. For universal use on lathes, rotary tables, dividing heads, etc.
Customer benefits:
Optimum price-performance ratioParticularly low Design for minimal interfering contours Jaws can be adjusted over the entire clamping range by turning the key. This enables workpieces with different clamping diameters to be quickly clamped. Jaws in the chuck ground for concentricity
Technical features:
With one set each of one-piece drilling and turning jawsVibration-damping body made of special cast ironSpiral ring drop-forged, balanced and hardened T-243180 101781 4019208027449 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/roehm-zg-100-3-jaws-din-6350-form-a-drilling-and-turning-jaws-cast-iron-body-101781-t-243180-4019208027449?dc=GB&cu=EUR 2026-09-15 341.05 United Kingdom GB DE 14
Customer benefits:
Optimum price-performance ratioParticularly low Design for minimal interfering contours Jaws can be adjusted over the entire clamping range by turning the key. This enables workpieces with different clamping diameters to be quickly clamped. Jaws in the chuck ground for concentricity
Technical features:
With one set each of one-piece drilling and turning jawsVibration-damping body made of special cast ironSpiral ring drop-forged, balanced and hardened T-243180 101781 4019208027449 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/roehm-zg-100-3-jaws-din-6350-form-a-drilling-and-turning-jaws-cast-iron-body-101781-t-243180-4019208027449?dc=GB&cu=EUR 2026-09-15 341.05 United Kingdom GB DE 14