Commercial customer offer**
RÖHM Face driver base body, ZA100 (without centering point, without draw-off nut) 313900
Sku: T-245291
Discontinued item
doneThread: M 10
doneHub: 5
doneHub: 5
doneType of processing: DrehenSchleifen
doneType_of_activation: Manuell betätigt
doneType_of_activation: Manuell betätigt
doneMade in Germany
RÖHM face driver base body, ZA100 (without centering point, without draw-off nut) 313900
Product data
Manufacturer:
RÖHM Spanntechnik
Condition:
NEW
Sku:
T-245291
SKU manufacturer:
313900
GTIN Code (EAN):
4019208069999
Weight:
6,95 Kg
All information relating to products from RÖHM Spanntechnik. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Face driver base CoK, mechanical, ZA 100, (without center point, without forcing nut)-For machining workpieces with great imbalance, heavy weight, high chip removal or non-uniform machining.-Power-operated face driver with mechanical pressure equalization.Clamping circle Ø 8 -80 mm.Workpiece weight max. 350 kg.-Highest concentricity of up to 0.01 mm.Longitudinal workpiece stop takes place in the centering.Low centering force even with the greatest cutting load.Highest flexibility through universal exchange of driver disk and centering tip.The drivers are force-operated and pressed against the workpiece
Areas of application:
For machining workpieces with a large imbalance, heavy weight, high chip removal or uneven machining.
Customer benefits:
Highest concentricity of up to 0.01 mmLongitudinal stop of the workpiece occurs in the centeringLow centering force even with the greatest cutting loadHighest flexibility through universal exchange of driver disc and center point
Technical features:
The drivers are force-operated and pressed against the workpiece
Areas of application:
For machining workpieces with a large imbalance, heavy weight, high chip removal or uneven machining.
Customer benefits:
Highest concentricity of up to 0.01 mmLongitudinal stop of the workpiece occurs in the centeringLow centering force even with the greatest cutting loadHighest flexibility through universal exchange of driver disc and center point
Technical features:
The drivers are force-operated and pressed against the workpiece
- STOP SLEEVE KFB-06
Additional information
Thread:
M 10
Hub:
5
Type of processing:
DrehenSchleifen
Type_of_activation:
Manuell betätigt
Outside diameter:
142
Diameter centre drill outside:
15
Diameter intake:
25
Body diameter:
90
Diameter Semi-circle:
120
Diameter centring bore:
100
Height Flange:
30
Length cylinder screw:
15
Body height:
98
Type of tension:
Werkstückspannung
Tool group No:
C15
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
Machine vices UZ, size 5, jaw width 200, centering clamp
014802
€1,655.84
€2,165.00 MSRP
-9%
Fixed centering points, MK 3, similar to DIN 807, full point with extraction nut
005654
€80.21
-24%
Machine vices UZ, size 4, jaw width 160, centering clamp
014752
€1,093.70
€1,430.00 MSRP
-10%
Fixed T-slot nuts, 20x22, hardened and ground, with fixing screw
014833
€48.49
-10%
Drilling machine vice BSH, size 1, jaw width 63, DIY version
007193
€36.01
-27%
Keyless drill chuck Supra S, size 8S, 3/8-24 mount, light version
871029
€61.84
€85.00 MSRP
-15%
Drilling machine vice BSH, size 5, jaw width 100, robust design
007201
€85.71
-3%
Forcing nut M48X1,5
005383
€62.34
Standard spanner, for size 74, hexagon 6
006325
€5.42
Forcing nut MK4 M36x1,5mm
005359
€31.05
-9%
Fixed centering points, MK 4 mount, DIN 806, half point Material: WS
013871
€108.23
-10%
Fixed T-slot nuts, 20x12, hardened and ground, with fixing screw
014823
€35.38
Hand crank, octagonal socket 19, length 200
009154
€65.00
-12%
Fixed centering points, MK 5, similar to DIN 807, full point with extraction nut
005381
€197.02
-18%
Drilling machine vice BSH, size 7, jaw width 140, robust design
007207
€119.03
€145.00 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
RÖHM Face driver base body, ZA100 (without centering point, without draw-off nut) 313900
Röhm
RÖHM
face driver base body
ZA100 (without centering point
without draw-off nut)
313900
4019208069999
clamping technology
gripping technology
Face driver base CoK, mechanical, ZA 100, (without center point, without forcing nut)-For machining workpieces with great imbalance, heavy weight, high chip removal or non-uniform machining.-Power-operated face driver with mechanical pressure equalization.Clamping circle Ø 8 -80 mm.Workpiece weight max. 350 kg.-Highest concentricity of up to 0.01 mm.Longitudinal workpiece stop takes place in the centering.Low centering force even with the greatest cutting load.Highest flexibility through universal exchange of driver disk and centering tip.The drivers are force-operated and pressed against the workpiece
Areas of application:
For machining workpieces with a large imbalance, heavy weight, high chip removal or uneven machining.
Customer benefits:
Highest concentricity of up to 0.01 mmLongitudinal stop of the workpiece occurs in the centeringLow centering force even with the greatest cutting loadHighest flexibility through universal exchange of driver disc and center point
Technical features:
The drivers are force-operated and pressed against the workpiece T-245291 313900 4019208069999 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/roehm-face-driver-base-body-za100-without-centering-point-without-draw-off-nut-313900-t-245291-4019208069999?dc=GB&cu=EUR 2026-09-11 1773.24 United Kingdom GB DE 14
Areas of application:
For machining workpieces with a large imbalance, heavy weight, high chip removal or uneven machining.
Customer benefits:
Highest concentricity of up to 0.01 mmLongitudinal stop of the workpiece occurs in the centeringLow centering force even with the greatest cutting loadHighest flexibility through universal exchange of driver disc and center point
Technical features:
The drivers are force-operated and pressed against the workpiece T-245291 313900 4019208069999 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/roehm-face-driver-base-body-za100-without-centering-point-without-draw-off-nut-313900-t-245291-4019208069999?dc=GB&cu=EUR 2026-09-11 1773.24 United Kingdom GB DE 14