Remko WP WSP 140 Brine/water heat pump 257140

Brine/water heat pump for heating and hot water operation. Housing in an attractive design in combination with sound insulation and a silver-painted sheet steel front (RAL 9006) and integrated Smart Control. Fully hermetic refrigerant circuit with R 410A refrigerant with filter, receiver, scroll compressor and electronic expansion valve. High-efficiency controlled heating circuit pump. Brine circuit with high-efficiency controlled heat source pump, plate heat exchanger and flow monitor. Microprocessor-controlled heat output regulation using integrated Smart Control.

REMKO Smart-Control
The intuitive controller software with plain text menu and 4.3’ touch display. The commissioning assistant makes programming, maintenance and integration of additional modules easier for the installer.
Control with integrated microprocessor control for weather-compensated flow temperature control in heating mode in full text display.

Included as standard:
Safety group with SIV, automatic air vent and pressure gauge for heating circuit
2 shut-off valves 1‘ for heating circuits
2 shut-off valves 1’ for brine circuit
2 dirt filters 1”
1 outdoor sensor,
1 immersion sensor (intended for DHW heating)

Available as accessories:
Electr. Overflow valve 1”
Sludge separator
Air separator
Heat transfer medium with frost protection
Contact and immersion sensors for integrating additional system components
Storage systems
Smart Control cable remote control
Smart-Count (heat meter)
Smart-BVT loose (bivalent alternative operation)
Smart-Serv (9 kW electric auxiliary heating incl. emergency heating operation)
Smart-Web (emergency heating operation). emergency heating operation)
Smart-Web (Internet access)
3-way changeover valve for domestic hot water preparation
Highly efficient heating circuit pump groups unregulated/regulated

Technical performance data:
Type designationREMKO WSP 140
Heating output according to ErP 35/55°C[kW]11.0/9.0
Efficiency class (heating)A+++/A+++
Annual energy consumption 35/55°C [kWh]4723/4646
Space heating energy efficiency eta s181/159
Nominal heating output at B0/W35 1) [kW]10, 8
Nominal heating capacity at B0/W55 1) [kW]9.20
COP at B0/W35 1) 4.88
COP at B0/W55 1) 2, 75
Nominal heating capacity at W10/W35 1) [kW]14.10
Nominal heating capacity at W10/W55 1) [kW]11.90
COP at W10/W35 1) 6.30
COP at W10/W55 1) 3.50
Refrigeration capacity heat pump [kW] 9, 0
Nominal power consumption of brine pump [W]100
Cooling capacity /W7 KW/EER 2)12.0
Nominal heating volume flow [m³/h]1.6
Nominal heat source volume flow [m³/h]2.1
Max. heating water flow temperature [°C [°C]60
Max. Pressure loss heat source [kPa]70
Max. Pressure loss heating system [kPa]80
Application limits heating heat source [°C]-15 to +20
Application limits cooling heat source [°C]+5 to +18
AntifreezeGlycol
Refrigerant/base charge [-/kg]R 410 A / 2.6
CO² equivalent [t] 5.4
Voltage supply comp. IM [V/~/Hz]400V/3~/50
Power supply Smart Control IM [V/~/Hz]230/1/50
Power supply E-heating element IM [V/~/Hz] 400V/3~/50
Nominal power consumption (B0/W35) [kW]2, 22
Nominal current consumption (B0/W35) [A]3.60
Sound power level indoor module LpA [dB(A)] 40
Sound pressure level max. Indoor module LpA [dB(A)] 35
Indoor module dimensions HxWxD [mm]1065x650x650
Indoor module weight [kg]200.00


1) COP = Coefficient Of Performance according to EN 14511, VDE tested
2) EER=Energy Efficiency Ratio according to EN 14511
3) with quarter-spherical dispersion in 1m, B0/W55 measurement according to DIN EN 12102 and DIN EN ISO 9614-2

The appliances comply with the relevant EU regulations and are CE-marked in accordance with the applicable directives. The appliances have been tested by VDE.