Remko WP RBW 301 PV-S, versatile in use 243605

As a floor-standing cylinder with external high-performance pipe register, heat pump and electric heater integrated at the top). Cover with 2 rotatable connection spigots D=150 mm (supply and exhaust air, max. pipe length per duct 6m). Thanks to the flexible connections, installation with low ceiling heights (min. 2.10 m) can be realised. No heat transfer losses between heat pump and cylinder. Tried and tested technology, easy to install, simple to integrate into all systems. The integrated heat exchanger can be used with a solar thermal system or a second heat generator. No electrical or refrigeration connection work required. The cold water inflow technology prevents mixing of the cylinder when large quantities are tapped. Optimum temperature measurement is realised through the use of 2 sensors in the cylinder. The hot gas defrosting system ensures use at low outside temperatures. The appliance has a compact design and is ready to plug in. Corrosion protection through high-quality enamelling and magnesium protective anode. The cylinder is equipped with high-quality insulation. Different operating modes can be set via the modern touch display Parallel operation heat pump + integrated electric auxiliary heating or legionella programme as standard. Economy mode with at least 40°C possible, can be heated up to 60° using electric heating. Automatic switch-off of the heat pump at temperatures below -7°C. Digital temperature display. Potential-free switching input for photovoltaic system to increase self-consumption using the Smart Heating function

Technical performance data:
Type designationREMKO RBW 301 PV-S
Gross water volume [l]300
Net water volume [l]280
Energy efficiency class A+
Nominal heating output at A7/W55 1) [kW]1, 8
COP according to ErP1) 3.72
Application limits heating [°C]-7 to +40 °
Nominal power consumption (A7/W50) [kW]0.46
Annual energy consumption [kWh]1087
Max. Power consumption (A7/W50) [kW]2.06
Nominal power consumption (A7/W50) [A]6.5
Max. Current consumption (A7/W50)9.0
Electric heating element output [kW]1.5
Fuse [A]16A slow blow
Sound power level [dB(A)]53
Sound pressure level 2) [dB(A)]45
Channel connection [mm]150
Max. Duct length per duct [m]6
Max. Pressure loss duct length [kPa]50
Max. Air volume flow [m³/h]350
Solar heat exchanger [m2]1.5
Nominal voltage230/1/50
RefrigerantR 134a
Refrigerant quantity [kg]1.25
Water connections 3/4”
Dimensions (H) [mm]1. 870
Diameter [mm]650
Weight [kg]144.00
1) COP = Coefficient Of Performance according to ErP
2) Distance 1m, with hemispherical dispersion
The units comply with the relevant EU regulations and are CE-marked in accordance with the applicable directives. The devices have been tested by TÜV Süd.