Remko WP indoor module LWM 300 IM LWM 80-150 262090

Compact indoor module for air/water monobloc heat pump series LWM 80-150 for heating and hot water operation. Silver-painted sheet steel front (RAL 9006) in an attractive design. 3-way changeover valve for DHW heating and electronic bypass valve are installed and electrically wired to the Smart Control. Simple installation and a small footprint are guaranteed.

REMKO Smart-Control Touch
The 4.3’ Smart Control touch display integrated into the front of the housing can be used to set all the functions of the heat pump and the heating circuits. The intuitive controller software with plain text menu and commissioning wizard makes installation, maintenance and integration of additional modules easier for the installer.
One heating circuit, DHW preparation and temperature control can be realised as standard. Control of two mixed heating circuits (floor or radiator) with different flow temperatures is possible using an additional buffer tank. The required I/O module is installed and pre-wired in the indoor module. Dew point control via a separately installed humidity sensor/temperature sensor is possible. This is required for temperature control, e.g. cooling via a floor circuit. We recommend installing an additional dew point monitor (Remko EDP no. 259070) when temperature control is activated via panel heating systems.

Included as standard:
Enamelled 300L EWS 301E DHW cylinder
4.3’ Smart Control touch display integrated in the front cover
Smart Control I/O module
3-way changeover valve for DHW
Electronic bypass valve
Filling and draining tap

Available as an accessory:
SmartCool
Sludge separator
Air separator
Heat transfer medium with frost protection
Contact and immersion sensors for integrating additional system components
Storage systems
Smart Control Touch wired remote control
Smart-Count (heat meter)
Smart-Serv (7.5 kW elect. Additional heating)
Smart-Web (Internet access)


Technical performance data:
Type designationREMKO LWM 80-150 IM
Heat pump typeLWM 80-150
Flow temperature heating water max. [°C]65
Energy efficiency class B
Tap profile XL
BEVB [kWh/24h]1, 64
Heat retention losses [W] 68
Heat pump connection thread VL1 1/4‘ AG (flat sealing)
Heat pump connection thread RL1 1/4’ AG (flat sealing)
Heating connection thread VL1 1/4’ AG (flat-sealing)
Heating connection thread RL1 1/4‘ AG (flat-sealing)
Circulation connection thread3/4’
Cold water inlet connection thread1‘
Hot water outlet connection thread1’
Operating pressure max. [bar]10
Height [mm]1,420
Diameter [mm]650
Tilt dimension [mm]1560
Net drinking water volume [L]264
Voltage supply Smart Control IM [V/~/Hz]230/1/50
Communication with heat pump Modbus shielded e.g. 3x 1.0mm² [mm e.g. 3x 1.0mm²
Dimensions AM HxWxD [mm]1450x650x960
Weight outdoor module [kg]160