Remko WP CMF 120 AM, versatile in use 250049

Outdoor module CMF 120
Inverter-controlled outdoor module with REMKO SuperTec technology for heat absorption from the ambient air. Outdoor installation. Housing and frame are made of sturdy galvanised sheet steel with additional weather-resistant polyester stove enamelling and internal sound insulation. Large removable panelling elements. Colour: in white, similar to RAL 9001.
Technical description:
The air inlet is via the evaporator/condenser with protection against external influences by a plastic grille.
High-performance heat exchanger, manufactured as an evaporator from refrigerator-quality copper pipe with pressed-on aluminium fins. L-shaped with multiple injection to increase performance. Smooth-running speed-controlled axial fan with a plastic impeller, statically and dynamically balanced with horizontal contact protection grille. Weather-protected drive motor, maintenance-free and equipped with thermal overload protection.
Suction gas-cooled, DC twin rotary piston compressor, speed-controlled via inverter. The use of neodymium magnets has increased torque and minimised friction losses. Pulse-width modulation for optimum sinusoidal characteristics. Mounted on vibration dampers for low vibration and quiet running, with high efficiency, motor protection against overcurrent and thermal overload, equipped with sound insulation as standard.
The pioneering SuperTec technology of the 2-phase low-pressure refrigeration circuit for subcooling the refrigerant enables high efficiency at low outside temperatures, directly by means of oil warming, inverter technology and motor winding for easy start-up and to prevent the accumulation of liquid refrigerant in the chiller oil.
Protected from liquid hammer on the suction side by a generously dimensioned liquid separator. Safety chain consisting of a high-pressure and low-pressure switch, overheating protection and overcurrent protection. All functions are monitored and controlled by a microprocessor. Microprocessor-controlled on-demand defrosting by means of a circuit reversal ensures low defrosting cycles.

Refrigeration circuit with R 410 A refrigerant with filter, receiver, 4-way changeover valve. Service/filling connections with lockable valves. Electronic expansion valves for pressure and noise reduction installed in the outdoor unit. The refrigeration circuit is pressure-tested, leak-tested, dried, evacuated and filled with refrigeration machine oil. Future-orientated 2-phase low-pressure refrigeration circuit, with safety refrigerant. Prefilled for a maximum single pipe length of 30 metres. The maximum permissible pipework length is 50 metres.

Technical performance data:
Type designationREMKO CMF 120
Heating capacity min. max. [kW]3.5-11
Cooling capacity A35/W7 [kW/EER3)/Hz]5.4/2.9/70
Nominal heating capacity at A7/W35 1) [kW]10.00
Nominal heating capacity at A2/W35 1) [kW]7.20
Nominal heating capacity at A2/W35 2) [kW]5.10
Nominal heating capacity at A-7/W35 1) [kW]4, 80
COP at A7/W35/HZ 1)4.3/96
COP at A2/W35/HZ 1)3.4/96
COP at A2/W35/HZ 2)3.9/61
COP at A-7/W35/HZ 1)2.5/99
RefrigerantR 410 A
Refrigerant quantity [kg]3.50
Air volume flow outdoor unit, max. [m³/h]3300
Sound pressure level outdoor unit LpA 1m [dB(A)]53
Voltage supply [V/~/Hz]230/1/50
Refrigerant connections3/8‘ / 5/8’
Refrigerant line without refilling, length max. [m]30.0
Refrigerant line, length max. [m]50.0
Height difference refrigerant line, max. [m]15.0
Outdoor unit dimensions (H/W/D) [mm]945/950/330
Outdoor unit weight [kg]75.00

1) COP=Coefficient Of Performence (coefficient of performance) according to EN 14511, TÜV tested
2) COP=Coefficent Of Performence according to EN 14511 with alternative compressor frequency of the inverter
3) EER=Energy Efficence Ratio according to EN 14511

The appliances comply with the relevant EU regulations and are CE-marked in accordance with the applicable directives. The appliances have been tested by TÜV Süd.