Remko RK WP WKF 130 IM, versatile in use 264021

Indoor module WKF 130
Enclosure in an attractive design made of EPP plastic in combination with a silver-painted sheet steel front (RAL 9006) with full-surface designer font and integrated Smart Control for regulating the heating system and energy management. Bypass valve to ensure the minimum volume flow and electronic flow monitor for permanent volume flow measurement as well as Smart Serv (electric heating element) are integrated.
The internal speed-controlled high-efficiency pump can be used as a heating circuit pump for a distribution system with a pressure loss of up to 70 kPa.

REMKO Smart-Control
The intuitive controller software with plain text menu and commissioning wizard makes installation, maintenance and integration of additional modules easier for the installer.
Control with integrated microprocessor control for weather-compensated flow temperature control in heating mode in full text display and animation.

Included in the standard scope of delivery:
Smart-Serv (6 kW elect. Additional heating)
Safety group with SIV, automatic air vent and pressure gauge
2 shut-off valves 1‘ with thermometer
Dirt filter 1’
Filling and draining tap ½”
1 external sensor,
1 immersion sensor (intended for DHW heating)

Accessories available:
Overflow valve 1”
Contact and immersion sensors for integrating additional system components
Storage systems
Smart Control Touch remote control
Smart-Count (heat meter)
Smart- BVT (bivalent alternative operation)
Smart-Web
Smart-Cool
3-way changeover valve for domestic hot water preparation
Highly efficient heating circuit pump groups unregulated/regulated

Technical performance data:
Type designationREMKO WKF 130 IM
Heating application range [kW]9-12
Sound pressure level min. /max in 5m 33/39
Heating output [kW]2.0-12.5
Space heating energy efficiency Average 35/55 [%]212/147
Efficiency class (heating)A++/A++
Application limits heating [°C]-20 to +37
Flow temperature heating water max. [°C]60
Cooling capacity [kW]2.1-10.5
Cooling application limits [°C]+15 to +43
Cooling water flow temperature min. [°C]7
RefrigerantR32
Refrigerant quantity [kg]1.8
Additional filling quantity from 5m single length [g/m]30
Refrigerant connections3/8‘ / 5/8’
Refrigerant pipe, max. length [m]20.0
Height difference refrigerant line, max. [m]10.0
Nominal water volume flow [m³/h]1.4
External pressure loss [kPa]70.0
Voltage supply IM [V/~/Hz]230/1/50
Dimensions (H/W/D) [mm]500/800/500
Internal module weight [kg]45

The appliances comply with the relevant EU regulations and are CE-marked in accordance with the applicable directives. The appliances have been tested by VDE.