Remko Air conditioning cold water WLT 27-3 1611727

Chilled water wall-mounted unit for installation in the upper wall area with valve assembly in the two-pipe system.

Unit installation using wall bracket. Housing in a flat, attractive design made of white, impact-resistant plastic.

Air inlet via a generously dimensioned, regenerable air filter. Easy access via the device cover that can be opened at the front. Air outlet via air guide louvre with horizontally and vertically adjustable blades. Automatic swing operation of the horizontal fins for better air distribution possible.

Air cooler in Cu/Al design made of seamlessly drawn copper pipe with form-fit aluminium fins for cold or hot water or water/glycol mixture up to max. 70 °C. Tightness tested at the factory. Pipe connections in metric design with vent and drain valves in the appliance.

Insulated condensate tray made of plastic for collecting the condensate produced on the evaporator. Condensate connection at the side, bottom or rear of the unit.

Smooth and quiet tangential fan. Drive via a multi-stage adjustable motor, statically and dynamically balanced.

Electrical connection compartment with connection terminals for power supply and control cable to the outdoor unit.

Convenient control with operation via handy infrared remote control. Manual selection of the operating modes ‘Ventilation’, ‘Cooling’, ‘Heating’, ‘Dehumidification’, ‘Timer’, ‘Night boost’, ‘Automatic’. Fan speed can be preselected manually, automatic adjustment to the cooling requirement in automatic mode. Display of the set operating statuses on the remote control. Manual operation, without infrared remote control, with fixed operating states possible. Safety devices to prevent frost build-up on the air cooler and to avoid medium temperatures that are too low (heating mode) or too high (cooling mode) integrated in the control. Restart after power failure. Operating displays and infrared receiver on the front of the appliance.

The water volume flow is controlled by a standard 3-way valve assembly in the appliance.

Included as standard:
Restart after power failure
Wall bracket
Infrared remote control
3-way valve assembly

Available as accessories:
Condensate pump
Cable remote control

The appliances comply with the relevant EU regulations and are CE-marked in accordance with the applicable directives.

Technical performance data:
MakeREMKO
TypeWLT 27-3
Nominal cooling capacity 1) [kW]2.73
Nominal heating capacity 2) [kW]5, 38
Operating limits for medium [°C]+4 to +70
Air flow rate per stage [m³/h]320/365/415
Sound pressure level per stage 3) [dB(A)]28/31/36
Voltage supply [V/~/Hz]230/1/50
Electr. Nominal power consumption [kW]0.03
Nominal electrical current consumption [A]0.14
Operating medium max. 35% glycol
Operating pressure, max, Medium [kPA]600
Nominal volume flow, medium [m³/h]0.46
Nominal pressure loss 1) [kPa]20.5
Nominal pressure loss 2) [kPa]18, 5
Medium connections [mm]12
Dimensions of unit (H/W/D) [mm]305/990/180
Weight [kg]10.4

1) Room temperature TK 27°C, FK 19°C, medium inlet 7°C, medium outlet 12°C, 0% glycol concentration, max. air volume flow [m³/h]0.46 air volume flow rate
2) Room temperature TK 20°C, FK 19°C, medium inlet 70°C, medium outlet 60°C, 0% glycol concentration, max. air volume flow rate
3) Distance 1 m