Remko Air conditioning cold water RVS 180 DC 1611695

Air-cooled chiller in compact design for outdoor installation with infinitely variable capacity control for cooling and heating.
Weather-resistant base frame with removable cladding panels made of powder-coated steel, colour similar to RAL 9010. Condenser and sound-insulated compressor room separated from each other. Air inlet via large, efficiency-optimised high-performance condenser in corner design made of refrigeration copper pipe with specially finned aluminium fins to increase the heat exchanger surface and condenser protection grille. Air discharge through aerodynamically optimised, statically and dynamically balanced axial fans with protective cage. Modern EC fans and integrated fan control to reduce operating costs and optimise the fan speed to the respective ambient conditions. Infinitely variable speed control through thermal low-noise fan control for particularly low noise emissions. Standard operating limits in cooling from -15°C to +45°C, in heating from -20°C to +52°C,
1 fully hermetic, vibration-damped inverter compressor in rolling piston design for infinitely variable adjustment of the compressor frequency, with refrigerating machine oil filling. Refrigerant circuit made of refrigerant copper pipe, hermetically sealed and pressure-tested at the factory, dried and filled with R410A safety refrigerant. Control option via Schrader valve. High and low pressure switches, filter dryer and electronic expansion valve to increase energy efficiency and improve control quality. Evaporator as refrigerant-water heat exchanger as shell and tube heat exchanger, vapour diffusion-tight insulation, return temperature range from +10 °C to +20 °C. Insulated medium circuit with manual air vent valve, differential pressure switch for monitoring the volume flow and speed-controlled circulation pump in accordance with the Ecodesign Directive. Medium connections in solid design with imperial internal thread. Internal switch box with terminal strip for mains supply, contact for external release, potential-free contact for collective fault signalling and connection of a wired remote control. Fully wired and tested main and control circuit with transformer, control fuses to protect the appliance circuit board. Automatic restart after power failure. Modern touch controller in splash-proof IP54 housing for operating the appliance and setting other operating parameters. RS485 Modbus interface as standard. User-dependent input of the return temperature can be changed without a password. Clear value display of medium inlet and outlet temperature as well as function display of fan, compressor, required maintenance interval and elementary faults, e.g. high/low and differential pressure. Coded fault messages and display of all operating-relevant control parameters accessible with password protection.
Compliance with all requirements of the Ecodesign Directive (EU) 2016/2281 (LOT 21) through optimised heat exchanger surfaces, use of high-efficiency components and optimisation of the system parameters relevant to operation.

Available as accessories:
Glycol
Cable remote control
Vibration damper

Technical device handover

The devices comply with the relevant EU regulations and are CE-marked in accordance with the applicable directives.

Technical performance data:
MakeREMKO
TypeRVS 180 DC
Cooling capacity 1) [kW]16.9 (7.0-20.0)
Heating capacity 2) [kW]18.0 (7.0-25.1)
SEER [--]4.15
Room cooling annual utilisation factor [%]163
Setting range, return temperature cooling [°C]+10 to +20
Setting range, Heating return temperature [°C]+30 to +50
Cooling operating range [°C]-15 to +45
Heating operating range [°C]-20 to +52
RefrigerantR410A
Refrigerant, Basic quantity [kg]4.4
CO2 equivalent [t]9.19
Compressor, number / type1 / roller piston
Fan, number2
Air volume flow, max. [m³/h]8,600
Sound pressure level 3) [dB(A)]46.2
Sound power level [dB(A)]77.6
Voltage supply [V/~/Hz]400/3/50
Protection classIP X4
Electr. current consumption max. cooling [A]14.0
Electr. rated power consumption cooling 1) [kW]5.5
Electr. Nominal current consumption cooling 1) [A]9.5
Nominal volume flow, medium cooling [m³/h]4.2
Medium connections [”]1 1/4
Outdoor unit dimensions (H/W/D) [mm]1588/1175/400
Weight [kg]219
Serial colour similar to RAL 9010

1) Air inlet 35°C TK, medium temperatures 7/12 °C, 0% glycol concentration
2) Air inlet 7°C TK, medium temperatures 45/40 °C, 0% glycol concentration
3) Distance 10 m free field