Pipe camera RUNPOCAM RC2 Cable length 30m GF3 RUNPOTEC 11146

Incl. GF 3 glass fibre rod Ø 3 mm - 30 m - for pipe inspections over long distances of up to 30 m. From 14 mm internal diameter (corresponds to empty pipe Ø 20 mm), but also for larger pipe cross-sections (ventilation systems, drains, sewage pipes, etc.) - Preservation of evidence, memory function, photo, video and audio documentation! Battery operation up to 6 hours - Multifunctional camera with 6 integrated LEDs (camera head protection class IP67) mounted in a robust stainless steel head (Ø 13 mm) with RUNPOTEC RTG Ø 6 mm internal thread - Compatible with all RUNPOTEC products with RTG Ø 6 m + GF3 thread - Cable pulling device incl. digital metre counter, glass fibre rod Ø 3 mm with anti-kink end sleeve and patented guide tip with twist compensation. Stored in an impact-resistant plastic box. The push-back protection prevents the fibreglass rod from accidentally slipping back into the box. The newly developed kink protection technology enables bending radii of up to R = 38 mm to be overcome. Total breaking load of 130 kg Accessories included: RC2 inspection camera: 1 x RC2 with cable 30 m incl. coil, 1 x RUNP2 inspection camera: 1 x RC2 with cable 30 m incl. coil. coil, 1 x RUNPOTEC system case, 1 x RG7 RUNPOGLEITER with front thread, 1 x system glider, 1 x LED rechargeable high-performance lamp 320 lumen, 1 x micro memory card 8 GB, 1 x magnetic catch set, 1 x connection thread set RTG Ø 6 mm (3-part), 1 x catch hook, 1 x attachment bendable 12 cm, 1 x USB cable 1.5 m, 1 x USB charging plug 230 V, 1 x threaded attachment RC 2, GF3: 1 x GF3 incl. metre counter in plastic box, length 30 m, 1 x RG7 guide tip with twist compensation, 1 x anti-kink end sleeve RTG Ø 6 mm, 1 x pull-in aid, 1 x special adhesive 3 g, 1 x cable pulling loop (Ø 14 mm outer), 6 x adhesive sleeve Ø 3 mm, 3 x pulling eye Ø 7 mm, 1 x bulb Ø 11 mm, 1 x connecting sleeve, 2 x installation spanner, 1 x button battery CR2032 Other technical features: - subject to testing: yes Note on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices Since we sell batteries and rechargeable batteries or devices that contain batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercury