zoom_in
zoom_out
fullscreen
-12%
PFERD Rigid extension SPV 150-8 S8 87100134
Sku: T-265122
€43.82 (excl. legal VAT, excl. Shipping)
In stock,ready for shipping within 24h
Piece
doneTool holder: 8
doneRemarks: ergonomic
doneRemarks: ergonomic
doneMaterial No.: SPV 150-8 S8
doneOverall length (mm): 150mm
doneOverall length (mm): 150mm
doneMade in Germany
Content:
1 Piece
Shipping:
€41.93 Versandservice to United Kingdom
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
PFERD Tools
Condition:
NEW
Sku:
T-265122
SKU manufacturer:
87100134
GTIN Code (EAN):
4007220184400
Weight:
0,12 Kg
All information relating to products from PFERD Tools. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Extensions for drive spindles are used to extend the shafts of grinding and milling tools. They enable use in hard-to-reach places and are clamped into the collet of the machine (compressed air or electric drive) or into the handpiece of the flexible shaft.Extensions for drive spindles are an economical alternative to custom-made milling and grinding pins with long shafts.Safety note: Attention! When using spindle extensions, the applicable safety regulations and accident prevention regulations must be observed.When working with long shaft lengths, it is imperative that the tool is inserted into the workpiece (e.g. holes, pipes, channels or grooves) before switching on the drive machine. Under no circumstances must the extension run freely with the tool outside the workpiece.Failure to do so increases the risk of accidents! Under unfavorable conditions, there is a risk of the extension bending with the tool clamped in. The extension is only suitable for hand use in conjunction with suitable pneumatic or electric drives or flexible shaft handpieces for tools with standard shafts. It is inserted into the impact-free collet of the device in conjunction with a tool approved for the speed. Under no circumstances may it be clamped on the transition radius. Clamping a second extension or tools with overly long shafts is prohibited.
Additional information
Tool holder:
8
Remarks:
ergonomic
Material No.:
SPV 150-8 S8
Overall length (mm):
150mm
Max. RPM (min⁻¹):
10000min-¹
ø Chuck (drive/handle):
8
Length of intake stud:
30
Max. RPM (RPM):
10000RPM
Max. spindle-ø (mm):
15,9mm
Length of intake cam L2:
30
Tool holder bore Bo. (mm):
8
Length (total) (mm):
150mm
Max. RPM:
10000RPM
Net weight:
0.11kg
Tool holder (Ø mm):
8mm
Length, intake stud (mm):
30mm
Ø Shaft intake [mm]:
8
Ø Spindle, max. (mm):
15.9mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-12%
Rigid extension SPV 150-6 S8
87100363
€36.81
-13%
Rigid extension SPV 75-1/4 SPG6
89912001
€135.20
-13%
Rigid extension SPV 50-6 S8
87100365
€98.82
-13%
Rigid extension SPV 100-6 SPG6
87101237
€135.20
-13%
Rigid extension SPV 75-6 S8
87100358
€98.82
-13%
Rigid extension SPV 50-3 S6
87100359
€106.63
-13%
Rigid extension SPV 36-6 S6
87100069
€100.55
-13%
Rigid extension SPV 50-1/8 S1/4
89912000
€106.63
-13%
Rigid extension SPV 100-1/4 SPG6
89912003
€135.20
-12%
Rigid extension SPV 150-3 S6
87100362
€36.81
-13%
Rigid extension SPV 100-6 S8
87100357
€98.82
-13%
Rigid extension SPV 75-1/4 S3/8
89912002
€98.82
-13%
Rigid extension SPV 75-6 SPG6
87100728
€135.20
-13%
Rigid extension SPV 50-3 S8
87100356
€106.63
-19%
HM burr WRC 0820/6 TOUGH
21000033
€31.47
€38.82 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PFERD Rigid extension SPV 150-8 S8 87100134
Extension for drive spindles
PFERD
Pferd 4007220184400
Pferd 87100134
PFERD tools
Extensions for drive spindles are used to extend the shafts of grinding and milling tools. They enable use in hard-to-reach places and are clamped into the collet of the machine (compressed air or electric drive) or into the handpiece of the flexible shaft.Extensions for drive spindles are an economical alternative to custom-made milling and grinding pins with long shafts.Safety note: Attention! When using spindle extensions, the applicable safety regulations and accident prevention regulations must be observed.When working with long shaft lengths, it is imperative that the tool is inserted into the workpiece (e.g. holes, pipes, channels or grooves) before switching on the drive machine. Under no circumstances must the extension run freely with the tool outside the workpiece.Failure to do so increases the risk of accidents! Under unfavorable conditions, there is a risk of the extension bending with the tool clamped in. The extension is only suitable for hand use in conjunction with suitable pneumatic or electric drives or flexible shaft handpieces for tools with standard shafts. It is inserted into the impact-free collet of the device in conjunction with a tool approved for the speed. Under no circumstances may it be clamped on the transition radius. Clamping a second extension or tools with overly long shafts is prohibited.
T-265122
87100134
4007220184400
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/pferd-rigid-extension-spv-150-8-s8-87100134-t-265122-4007220184400?dc=GB&cu=EUR
2026-06-27
43.82
United Kingdom
GB
DE
14