PFERD Lubricant FT 3 86396003

(1+2) Special lubricating oilFor compressed air devices for oil mist lubrication. To protect against icing. Advantages: Good misting ability.High lubricating power. Low viscosity. Protects against corrosion. Highly water-repellent. (3) Gear grease FT 3 For gears of flexible shaft machines, angle drives, angle handpieces.(4) Ball bearing grease FT 5 For all ball bearings. For light wetting of centrifugal disks as dust seal.(5) Shaft grease FT 4 Special grease with special lubricating and adhesive properties for flexible shafts 4 ZG up to 15 KG.After approx. 100 hours of operation, the core of a flexible shaft must be re-lubricated. Degrease the core and hose and apply new special shaft grease to the core.(6) Care set consisting of:1 hose brush for removing the old grease from the protective hose. 2 lint-free cleaning cloths (400 x 330 mm) Remove old grease from the core using a degreasing agent and a cleaning cloth (do not use cleaning wool!). Apply new grease to the second cloth and pull the core through it.