PFERD Grinding sleeve KSB 1530 DIA 76 42248033

The grinding sleeves should always be used with coolant (water). Work with significantly reduced contact pressure. - Application examples: Removing ceramic coatings during turbine maintenance. Grinding and trimming of joints on components made of GRP laminates. Abrasive: Diamond D 251 (green) = P 60 D 126 (black) = P 120 D 76 (red) = P 200 P = grain size according to ISO 6344. - Excellent for grinding tasks on wear protection coatings and armoring made of tungsten carbide, chromium carbide, titanium carbide, etc., especially when machining ceramic coatings in engine and turbine construction. Also ideal for machining extremely abrasive materials such as glass and carbon fiber reinforced plastics. - Outstanding service life thanks to a special manufacturing process - even under the toughest operating conditions Particularly high material removal and high aggressiveness of the abrasive - Removal of weld seams in steel construction Fine grinding work in apparatus and container construction Post-processing during assembly and repair work Processing of edges and contours in engine construction - Grinding sleeves can be put on and taken off with a slight clockwise rotation Grinding sleeves are easier to change if the grinding sleeve carrier is clamped into the tool drive The secure fit of the grinding sleeve is only guaranteed if the minimum speed is maintained Grinding sleeves achieve their best performance at a recommended cutting speed of 20-30 m/s Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools