zoom_in
zoom_out
fullscreen
PFERD Diamond grinding point DZY-A 2.6-4/3 D 126 36002610
Sku: T-49923
Discontinued item
doneShaft length: 36mm
doneShaft Ø: 3mm
doneShaft Ø: 3mm
doneGrain size: D 126
doneLength L4: 14mm
doneLength L4: 14mm
doneMade in Germany
DZY-A 2,6-4/3 D 126
Product data
Manufacturer:
PFERD Tools
Condition:
NEW
Sku:
T-49923
SKU manufacturer:
36002610
GTIN Code (EAN):
4007220354568
Weight:
0,00 Kg
All information relating to products from PFERD Tools. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The ZY cylinder shape is suitable for grinding holes, radii and contours in stationary and hand-held use. Grinding pins with a diameter of 8 mm or more have a recess on the front surface. A = stepped shaft N = non-stepped shaft
- It can be used for both dry and wet grinding. If possible, wet grinding is preferable to reduce tool wear and the risk of thermal damage.
- In general: for optimum efficiency, choose the grain size to be as coarse as possible and as fine as necessary. Influencing factors include the hardness of the material and the required surface quality.
- Clogged tools can be cleaned with ultrasound. If the coating is heavily soiled, please use the sharpening rod DSB 2005025 (EAN 4007220168332) to clean.
- Choose the tool diameter as large as possible, as this increases the number of grains that are brought into contact. When grinding internally, the tool diameter may be a maximum of 3/4 of the diameter to be ground.
- The longitudinal feed during internal grinding may be a maximum of 2/3 of the tool width per workpiece revolution. The feed depends on the material to be machined, the cutting speed, the stability of the tool, its holder and the tool drive.
- Due to the single-layer coating, the work spindle and tool holder must have a high degree of concentricity. The finer the grain size used, the more accurate the concentricity must be.
- The tool drive must have sufficient drive power of the grinding spindle to ensure the required speed even under load.
- Dry grinding: 8–18 m/s
- Wet grinding: 15–25 m/s
Additional information
Shaft length:
36mm
Shaft Ø:
3mm
Grain size:
D 126
Length L4:
14mm
D [mm]:
2,6mm
T [mm]:
4mm
Remarks:
ergonomic
Material No.:
DZY-A 2,6-4/3 D 126
Width (mm):
4mm
Shaft (mm):
3mm
Outer diameter (mm):
2,6mm
Shaft length (mm):
36mm
Head length (mm):
4mm
Outside-ø (mm):
2,6mm
Shaft-ø (mm):
3mm
Length offset (mm):
14mm
ø Outer metric (mm):
2.6mm
Width metric (mm):
4mm
Length, shaft (mm):
36mm
Ø Shaft metric (mm):
3mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-21%
Diamond grinding point DZY-A 1.8-4/3 D126
36001810
€9.82
€12.48 MSRP
-21%
Diamond grinding point DZY-A 1.0-4/3 D 126
36001010
€9.40
€11.93 MSRP
-21%
Diamond grinding point DZY-A 1.2-4/3 D 91
36001209
€8.82
€11.22 MSRP
-22%
Diamond grinding point DZY-A 2.4-4/3 D 126
36002410
€9.99
€12.73 MSRP
-21%
Diamond grinding point DZY-A 3.0-4/3 D 64
36003006
€10.76
€13.70 MSRP
-22%
Diamond grinding point DZY-N 8.0-8/6 D 91
36008009
€19.15
€24.53 MSRP
-21%
Diamond grinding point DZY-A 2.0-4/3 D 126
36002010
€9.91
€12.61 MSRP
-21%
Diamond grinding point DZY-A 1.0-4/3 D 91
36001009
€9.40
€11.93 MSRP
-22%
Diamond grinding point DZY-A 1.4-4/3 D 91
36001409
€8.66
€11.05 MSRP
-22%
Diamond grinding point DZY-N 5.5-6/3 D 181
36005518
€14.45
€18.45 MSRP
-22%
Diamond grinding point DZY-A 6.0-6/6 D 91
36006009
€14.79
€18.91 MSRP
-22%
Diamond grinding point DZY-N 7.0-8/6 D 126
36007010
€17.61
€22.52 MSRP
-21%
Diamond grinding point DZY-A 3.0-4/3 D 91
36003009
€10.76
€13.70 MSRP
-21%
Diamond grinding point DZY-A 1.0-4/3 D 64
36001006
€9.40
€11.93 MSRP
-22%
Diamond grinding point DZY-N 5.5-6/3 D 126
36005510
€14.03
€17.94 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PFERD Diamond grinding point DZY-A 2.6-4/3 D 126 36002610
Diamond grinding pin
PFERD
Pferd 4007220354568
Pferd 36002610
PFERD tools
The ZY cylinder shape is suitable for grinding holes, radii and contours in stationary and hand-held use. Grinding pins with a diameter of 8 mm or more have a recess on the front surface. A = stepped shaft N = non-stepped shaft
T-49923
36002610
4007220354568
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/pferd-diamond-grinding-point-dzy-a-2-6-4-3-d-126-36002610-t-49923-4007220354568?dc=GB&cu=EUR
2026-07-14
10.17
United Kingdom
GB
DE
14