zoom_in
zoom_out
fullscreen
PFERD Diamond grinding point DKU-A 2.0/3 D 64 36202006
Sku: T-49952
Discontinued item
doneShaft length: 43mm
doneShaft Ø: 3mm
doneShaft Ø: 3mm
doneGrain size: D 64
doneLength L4: 8mm
doneLength L4: 8mm
doneMade in Germany
DKU-A 2.0/3 D 64
Product data
Manufacturer:
PFERD Tools
Condition:
NEW
Sku:
T-49952
SKU manufacturer:
36202006
GTIN Code (EAN):
4007220354933
Weight:
0,00 Kg
All information relating to products from PFERD Tools. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The KU ball shape is often used in hand-held applications. This shape is suitable for engraving, grinding contours and deburring. A = stepped shaft N = non-stepped shaft
- It can be used for both dry and wet grinding. If possible, wet grinding is preferable to reduce tool wear and the risk of thermal damage.
- In general: for optimum efficiency, choose the grain size to be as coarse as possible and as fine as necessary. Influencing factors include the hardness of the material and the required surface quality.
- Clogged tools can be cleaned with ultrasound. If the coating is heavily soiled, please use the sharpening rod DSB 2005025 (EAN 4007220168332) to clean.
- Choose the tool diameter as large as possible, as this increases the number of grains that are brought into contact. When grinding internally, the tool diameter may be a maximum of 3/4 of the diameter to be ground.
- The longitudinal feed during internal grinding may be a maximum of 2/3 of the tool width per workpiece revolution. The feed depends on the material to be machined, the cutting speed, the stability of the tool, its holder and the tool drive.
- Due to the single-layer coating, the work spindle and tool holder must have a high degree of concentricity. The finer the grain size used, the more accurate the concentricity must be.
- The tool drive must have sufficient drive power of the grinding spindle to ensure the required speed even under load.
- Dry grinding: 8–18 m/s
- Wet grinding: 15–25 m/s
Additional information
Shaft length:
43mm
Shaft Ø:
3mm
Grain size:
D 64
Length L4:
8mm
D [mm]:
2mm
Remarks:
ergonomic
Material No.:
DKU-A 2,0/3 D 64
Shaft (mm):
3mm
Outer diameter (mm):
2mm
Shaft length (mm):
43mm
Outside-ø (mm):
2mm
Shaft-ø (mm):
3mm
Length offset (mm):
8mm
ø Outer metric (mm):
2mm
Length, shaft (mm):
43mm
Ø Shaft metric (mm):
3mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-22%
Diamond grinding point DKU-A 8.0/6 D 126
36208010
€27.27
€34.95 MSRP
-22%
Diamond grinding point DKU-A 1.0/3 D 91
36201009
€10.59
€13.53 MSRP
-22%
Diamond grinding point DKU 4.0-10/3 D 181
36224018
€27.02
€34.62 MSRP
-22%
Diamond grinding point DKU-N 12.0/6 D 126
36212010
€44.20
€56.76 MSRP
-22%
Diamond grinding point DKU-N 6.0/3 D 126
36206010
€22.10
€28.32 MSRP
-22%
Diamond grinding point DKU-A 5.0/3 D 91
36205009
€18.39
€23.53 MSRP
-22%
Diamond grinding point DKU-A 3.0/3 D 91
36203009
€12.77
€16.34 MSRP
-22%
Diamond grinding point DKU-A 5.0/3 D 126
36205010
€18.39
€23.53 MSRP
-22%
Diamond grinding point DKU-A 4.0/3 D 126
36204010
€14.33
€18.28 MSRP
-22%
Diamond grinding point DKU-N 6.0/3 D 181
36206018
€22.43
€28.73 MSRP
-22%
Diamond grinding point DKU-A 5.0/3 D 181
36205018
€19.87
€25.42 MSRP
-22%
Diamond grinding point DKU-A 3.0/3 D 126
36203010
€12.77
€16.34 MSRP
-22%
Diamond grinding point DKU-A 2.0/3 D 126
36202010
€13.18
€16.85 MSRP
-22%
Diamond grinding point DKU-A 1.0/3 D 126
36201010
€10.59
€13.53 MSRP
-22%
Diamond grinding point DKU-A 2.0/3 D 91
36202009
€13.18
€16.85 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PFERD Diamond grinding point DKU-A 2.0/3 D 64 36202006
Diamond grinding pin
PFERD
Pferd 4007220354933
Pferd 36202006
PFERD tools
The KU ball shape is often used in hand-held applications. This shape is suitable for engraving, grinding contours and deburring. A = stepped shaft N = non-stepped shaft
T-49952
36202006
4007220354933
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/pferd-diamond-grinding-point-dku-a-2-0-3-d-64-36202006-t-49952-4007220354933?dc=GB&cu=EUR
2026-07-14
12.93
United Kingdom
GB
DE
14