zoom_in
zoom_out
fullscreen
PFERD Diamond grinding point DKT 10.0-30°/6 D 126 36461010
Sku: T-49884
Discontinued item
doneShaft length: 50mm
doneShaft Ø: 6mm
doneShaft Ø: 6mm
doneAngle: 30°
doneGrain size: D 126
doneGrain size: D 126
doneMade in Germany
DKT 10,0-30°/6 D 126
Product data
Manufacturer:
PFERD Tools
Condition:
NEW
Sku:
T-49884
SKU manufacturer:
36461010
GTIN Code (EAN):
4007220354025
Weight:
0,02 Kg
All information relating to products from PFERD Tools. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The KT cup shape is ideal for machining profiles, flat surfaces and steps without damaging the cylinder surface.
- It can be used for both dry and wet grinding. If possible, wet grinding is preferable to reduce tool wear and the risk of thermal damage.
- In general: for optimum efficiency, choose the grain size to be as coarse as possible and as fine as necessary. Influencing factors include the hardness of the material and the required surface quality.
- Clogged tools can be cleaned with ultrasound. If the coating is heavily soiled, please use the sharpening rod DSB 2005025 (EAN 4007220168332) to clean.
- Choose the tool diameter as large as possible, as this increases the number of grains that are brought into contact. When grinding internally, the tool diameter may be a maximum of 3/4 of the diameter to be ground.
- The longitudinal feed during internal grinding may be a maximum of 2/3 of the tool width per workpiece revolution. The feed depends on the material to be machined, the cutting speed, the stability of the tool, its holder and the tool drive.
- Due to the single-layer coating, the work spindle and tool holder must have a high degree of concentricity. The finer the grain size used, the more accurate the concentricity must be.
- The tool drive must have sufficient drive power of the grinding spindle to ensure the required speed even under load.
- Dry grinding: 8–18 m/s
- Wet grinding: 15–25 m/s
Additional information
Shaft length:
50mm
Shaft Ø:
6mm
Angle:
30a
Grain size:
D 126
D [mm]:
10mm
T [mm]:
5mm
Remarks:
ergonomic
Material No.:
DKT 10,0-30°/6 D 126
Width (mm):
5mm
Shaft (mm):
6mm
Outer diameter (mm):
10mm
Shaft length (mm):
50mm
Head length (mm):
5mm
Outside-ø (mm):
10mm
Shaft-ø (mm):
6mm
ø Outer metric (mm):
10mm
Width metric (mm):
5mm
Length, shaft (mm):
50mm
Ø Shaft metric (mm):
6mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-22%
Diamond grinding point DKT 3.0-8°/3 D 126
36453010
€20.25
€25.96 MSRP
-22%
Diamond grinding point DWR-A 5.0-18/6 D 126
36425026
€26.89
€34.50 MSRP
-22%
Diamond grinding point DWR-N 10.0-20/6 D 126
36431026
€47.05
€60.41 MSRP
-22%
Diamond grinding point DWR-N 10.0-20/6 D 357
36431057
€47.61
€61.17 MSRP
-22%
Diamond grinding point DWR-A 6.0-18/6 D 126
36426026
€27.44
€35.17 MSRP
-22%
Diamond grinding point DWR-A 6.0-18/6 D 357
36426035
€37.69
€48.39 MSRP
-22%
Diamond grinding point DSPG 6.0-18/6 D 126
36443030
€23.45
€30.04 MSRP
-22%
Diamond grinding point DWR-A 5.0-18/6 D 357
36425035
€36.05
€46.26 MSRP
-22%
Diamond grinding point DSPG 3.0-7/3 D 126
36443010
€17.14
€21.93 MSRP
-22%
Diamond grinding point DSPG 3.0-13/3 D 126
36443020
€22.69
€29.08 MSRP
-48%
PFERD sharpening files CS-SL-4.8
11099048
€7.39
€14.16 MSRP
-8%
Single-open-end/double-open-end wrench EM SW 13/64
90000274
€11.93
-48%
HOOF PLANE FILE HANDLE FH 6/1
12612000
€17.47
€33.74 MSRP
-35%
HSS countersink KES HSS DIN 335 C90° 16.5
25202113
€10.13
€15.67 MSRP
-27%
Flexible grinding files SF 180-28-5 SiC 320
40110045
€1.72
€2.35 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PFERD Diamond grinding point DKT 10.0-30°/6 D 126 36461010
Diamond grinding pin
PFERD
Pferd 4007220354025
Pferd 36461010
PFERD tools
The KT cup shape is ideal for machining profiles, flat surfaces and steps without damaging the cylinder surface.
T-49884
36461010
4007220354025
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/pferd-diamond-grinding-point-dkt-10-0-30-6-d-126-36461010-t-49884-4007220354025?dc=GB&cu=EUR
2026-08-12
26.21
United Kingdom
GB
DE
14