zoom_in
zoom_out
fullscreen
PFERD CBN grinding pin BKU-A 1.0/3 B 64 36301006
Sku: T-49954
Discontinued item
doneShaft length: 44mm
doneShaft Ø: 3mm
doneShaft Ø: 3mm
doneGrain size: B 64
doneLength L4: 10mm
doneLength L4: 10mm
doneMade in Germany
BKU-A 1,0/3 B 64
Product data
Manufacturer:
PFERD Tools
Condition:
NEW
Sku:
T-49954
SKU manufacturer:
36301006
GTIN Code (EAN):
4007220354957
Weight:
0,00 Kg
All information relating to products from PFERD Tools. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
CBN ball grinding pins are often used for producing engravings or contours as well as for deburring work.A = stepped shankN = non-stepped shank
- It can be used for both dry and wet grinding. If possible, wet grinding is preferable to reduce tool wear and the risk of thermal damage.
- In general: for optimum efficiency, choose the grain size to be as coarse as possible and as fine as necessary. Influencing factors include the hardness of the material and the required surface quality.
- Clogged tools can be cleaned with ultrasound. If the coating is heavily soiled, please use the sharpening rod DSB 2005025 (EAN 4007220168332) to clean.
- Choose the tool diameter as large as possible, as this increases the number of grains that are brought into contact. When grinding internally, the tool diameter may be a maximum of 3/4 of the diameter to be ground.
- The longitudinal feed during internal grinding may be a maximum of 2/3 of the tool width per workpiece revolution. The feed depends on the material to be machined, the cutting speed, the stability of the tool, its holder and the tool drive.
- Due to the single-layer coating, the work spindle and tool holder must have a high degree of concentricity. The finer the grain size used, the more accurate the concentricity must be.
- The tool drive must have sufficient drive power of the grinding spindle to ensure the required speed even under load.
- Dry grinding: 15–25 m/s
- Wet grinding: 20–40 m/s
Additional information
Shaft length:
44mm
Shaft Ø:
3mm
Grain size:
B 64
Length L4:
10mm
D [mm]:
1mm
Remarks:
ergonomic
Material No.:
BKU-A 1,0/3 B 64
Shaft (mm):
3mm
Outer diameter (mm):
1mm
Shaft length (mm):
44mm
Outside-ø (mm):
1mm
Shaft-ø (mm):
3mm
Length offset (mm):
10mm
ø Outer metric (mm):
1mm
Length, shaft (mm):
44mm
Ø Shaft metric (mm):
3mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-26%
Schleifschwamm ASP 69x98x26 4S A 60
44697650
€1.25
€1.68 MSRP
-36%
HSS countersink KES HSSE DIN 335 C90° 19.0
25202135
€15.71
€24.37 MSRP
-29%
COMBIDISC sanding sheet CDR 75 A 36 PLUS
42775703
€1.85
€2.61 MSRP
-48%
PFERD sharpening files CS-SL-4.0
11099040
€7.39
€14.16 MSRP
-8%
Single-open-end/double-open-end wrench EM SW 13/64
90000274
€11.93
-48%
PFERD sharpening files FB
18301038
€7.61
€14.62 MSRP
-44%
Cup brush with shaft, unknotted TBU 1503/2.34 ZHW
43209209
€2.10
€3.78 MSRP
-15%
Carbide burr ZYA 0616/6 NON-FERROUS
21101696
€27.06
-49%
PFERD files for wood and rasps 3515 350 with handle (1)
13180351
€83.70
€164.03 MSRP
-48%
Saw file PF 1238 150 H2
11277157
€6.39
€12.26 MSRP
-26%
Fan grinder F 4020/6 A 120
44408126
€2.82
€3.82 MSRP
-48%
PFERD file handles, covers, brushes NFH 211-3 K BLUE (1)
12299005
€21.18
€41.01 MSRP
-27%
Flexible grinding files SF 180-28-5 SiC 320
40110045
€1.72
€2.35 MSRP
-15%
HM burr WRC 0820/6 TOUGH
21000033
€38.74
-15%
HM-FRAESSTIFTE SKM 0311/3 MICRO HC-FEP
21214174
€22.31
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PFERD CBN grinding pin BKU-A 1.0/3 B 64 36301006
CBN grinding pin
PFERD
Pferd 4007220354957
Pferd 36301006
PFERD tools
CBN ball grinding pins are often used for producing engravings or contours as well as for deburring work.A = stepped shankN = non-stepped shank
T-49954
36301006
4007220354957
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/pferd-cbn-grinding-pin-bku-a-1-0-3-b-64-36301006-t-49954-4007220354957?dc=GB&cu=EUR
2026-08-12
11.43
United Kingdom
GB
DE
14