PCE Power analyser PCE-PA 7500

The power meter is designed to accurately measure and analyse parameters such as power consumption and quality. The power meter has 2 input channels for measuring voltage, current, active power, power factor, frequency and energy consumption in kWh. In addition to the colour display, the power meter has additional input sockets for measurements up to 2 A. The measuring range of 0.1 ... 5000 W enables power measurement for many consumers in industry and trade. The power meter has a current measuring range of 0.001 ... 20 A AC with a resolution of 1 mA.

An alarm value for the power and current value can be set in the settings of the power meter, which emits an acoustic warning if the value is exceeded. The power meter is supplied with 4 safety measuring leads, the measuring sockets are also protected against electric shock to enable the operator to measure safely. The power meter can be used in the laboratory as well as in industrial environments thanks to the adjustable stand on the table.
AC voltage AC
Measuring range 2 ... 250 V
Resolution 0.01 V
Accuracy ±(0.4 % v.Mw. +0.1)
AC current
Measuring range 0.001 ... 20 A
Resolution 0.001 A
Accuracy ±(0.4 % v.Mw. +0.1)
Active power
Measuring range 0.1 ... 5000 W
Resolution 0.1 W
Accuracy ±(0.4 % v.Mw. +0.1)
Power factor
Measuring range 0.001 ... 1
Resolution ,
0.0001
General technical data
Number of measuring channels 3
Frequency 10 ... 100 Hz
Display type TFT colour display
Display size 4.3 inch
Cable length 2 m
Menu language English (US), Chinese
Protection class (device) IP20
Plug type IEC plug




Operating conditions 0 ... 40 °C , 0 ... 93 % r. h.Storage conditions 0 ... 55 °C , 0 ... 93 % r. h.Dimensions ( L x W x H ) 355 x 265 x 110 mmWeight 2870 g
1 x power analyser PCE-PA 7500
2 x safety test leads 2m black
2 x safety test leads 2m red
1 x IEC cable
1 x operating instructions