zoom_in
zoom_out
fullscreen
PCE PCE-DFG NF 10K Dynamometer | Measuring range 0..10 kN / 10,000 N / 1,000 kg | Resolution 1 N
Sku: T-909945
Discontinued item
doneMade in Germany
Force gauge PCE-DFG NF 10K with external load cell, USB interface and PC software
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-909945
SKU manufacturer:
PCE-DFG NF 10K
GTIN Code (EAN):
4250348719386
Weight:
1,71 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The force gauge with an external load cell is designed for measuring compressive forces in hard-to-reach measuring points. The load cell is connected to the force gauge by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
Related results
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-24%
sound level meter PCE-SLT-TRM
PCE-SLT-TRM
€269.71
€355.88 MSRP
-24%
digital thermometer PCE-T 330
PCE-T 330
€187.10
€246.89 MSRP
-24%
Durometer PCE-DX-AS
PCE-DX-AS
€108.28
€142.90 MSRP
-24%
Radon Monitor
PCE-RD 75
€143.91
€189.91 MSRP
-25%
PCE-EMD 5 hygrometer 0.0..99.9% RH|0...50 °C|connection of up to four external sensors|anal. 4..20mA
PCE-EMD 5
€598.32
€796.89 MSRP
-25%
Feuchtebestimmerwaage
PCE-UX 3011HQ
€2,995.80
€3,990.00 MSRP
-25%
Closing Force Measuring Device Original BIA Cl. 1 for Bus and Train Doors
BIA1-SY-10-310
€2,654.92
€3,536.01 MSRP
-25%
display / built-in display PCE-BPD-U-46A
PCE-BPD-U-46A
€568.31
€756.89 MSRP
-24%
building moisture meter PCE-PMI 4
PCE-PMI 4
€378.82
€499.91 MSRP
-25%
torque measuring device PCE-TM 80
PCE-TM 80
€619.37
€824.92 MSRP
-25%
Kraftmessgerät
PCE-DFG 50K XF
€1,310.13
€1,744.92 MSRP
-25%
Thickness Gauge PCE-CT 80HP-FN2
PCE-CT 80HP-FN2
€733.49
€976.89 MSRP
-24%
Pressure gauge PCE-PME 100
PCE-PME 100
€128.74
€169.91 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT3 for surfaces and water
PCE-ATP 1-KIT3
€1,441.51
€1,919.91 MSRP
-24%
Refractometer PCE-0100 Salinity
PCE-0100
€64.92
€84.92 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE PCE-DFG NF 10K Dynamometer | Measuring range 0..10 kN / 10,000 N / 1,000 kg | Resolution 1 N
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pc
pce instruments
measurement technology
control technology
weighing technology
laboratory technology
development
production
calibration
pce
pce instruments
weighing technology
platform scales
shipping scales
pallet scales
inventory scales
platform scales
industrial scales
multifunctional scales
compact scales
weighing platform
pce
pce instruments
measurement technology
machines
systems
vibration measurement
vibration measuring device
vibration measuring device
accelerometer
stethoscope
data logger
The force gauge with an external load cell is designed for measuring compressive forces in hard-to-reach measuring points. The load cell is connected to the force gauge by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. T-909945 PCE-DFG NF 10K 4250348719386 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-pce-dfg-nf-10k-dynamometer-measuring-range-0-10-kn-10-000-n-1-000-kg-resolution-1-n-t-909945-4250348719386?dc=GB&cu=EUR 2026-08-30 1265.08 United Kingdom GB DE 14
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. T-909945 PCE-DFG NF 10K 4250348719386 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-pce-dfg-nf-10k-dynamometer-measuring-range-0-10-kn-10-000-n-1-000-kg-resolution-1-n-t-909945-4250348719386?dc=GB&cu=EUR 2026-08-30 1265.08 United Kingdom GB DE 14