zoom_in
zoom_out
fullscreen
-24%
PCE Material thickness gauge PCE-TG 75A
Sku: T-1515501
€322.01 (excl. legal VAT, excl. Shipping)
€424.92 MSRP
In stock,ready for shipping within 48h
Piece
doneMade in Germany
Measured value memory
Calibration reference on housing
Automatic switch-off
Material thickness measurement up to 225 mm
Battery status display
Optional with ISO calibration certificate
Calibration reference on housing
Automatic switch-off
Material thickness measurement up to 225 mm
Battery status display
Optional with ISO calibration certificate
Content:
1 Piece
Shipping:
€73.87 Versandservice to United Kingdom
Lieferung:
Provider:
Sales and delivery by ToolTeam Köln
Payment methods:
Returns:
Security:
Product data
Manufacturer:
PCE Deutschland GmbH
Condition:
NEW
Sku:
T-1515501
SKU manufacturer:
PCE-TG 75A
GTIN Code (EAN):
4250348735546
Weight:
0,58 Kg
All information relating to products from PCE Deutschland GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
The material thickness gauge can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sonic velocity in the material thickness gauge. For materials such as steel, aluminium, zinc, silver and gold, the appropriate sonic velocities are already stored in the device library. This means that the material thickness gauge can be used universally.
Individual maximum and minimum values can be stored with the material thickness gauge’s limit value function. If the measured value of the test specimen is outside the limits, the material thickness gauge signals this visually. If required, the material thickness gauge can also provide acoustic signalling in addition to the visual display. The material thickness gauge is therefore used, for example, in quality assurance and incoming goods inspection.
The material thickness gauge has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the material thickness gauge. The stored data is displayed graphically by the material thickness gauge. In addition, each individual measuring point can be approached and read in the graphic of the material thickness gauge. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the material thickness gauge. The material thickness gauge can optionally be equipped with an ISO calibration certificate.
When selecting the measuring range, please take into account the weight of the container to be monitored. Filling quantity + container weight = measuring range. The measuring range is not increased by zeroing the container weight.”
1 x material thickness gauge PCE-TG 75A
1 x sensor PCE-TG 5M10d
1 x coupling gel (TT-GEL)
1 x transport bag
3 x 1.5 V AA batteries
1 x quickstart guide
Individual maximum and minimum values can be stored with the material thickness gauge’s limit value function. If the measured value of the test specimen is outside the limits, the material thickness gauge signals this visually. If required, the material thickness gauge can also provide acoustic signalling in addition to the visual display. The material thickness gauge is therefore used, for example, in quality assurance and incoming goods inspection.
The material thickness gauge has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the material thickness gauge. The stored data is displayed graphically by the material thickness gauge. In addition, each individual measuring point can be approached and read in the graphic of the material thickness gauge. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the material thickness gauge. The material thickness gauge can optionally be equipped with an ISO calibration certificate.
When selecting the measuring range, please take into account the weight of the container to be monitored. Filling quantity + container weight = measuring range. The measuring range is not increased by zeroing the container weight.”
1 x material thickness gauge PCE-TG 75A
1 x sensor PCE-TG 5M10d
1 x coupling gel (TT-GEL)
1 x transport bag
3 x 1.5 V AA batteries
1 x quickstart guide
Related results
PCE Instruments
PCE
PCE-TG 75A
PCE TG 75A
PCE Instruments
PCE-TG 75A
PCE Instruments PCE-TG 75A
NDT Test Instrument
Plastic Test Instrument
Ultrasonic Test Instrument
Ultrasonic Gauge
Thickness Gauge
Thickness Gauge
Material Thickness Gauge
Wall Thickness Gauge
NDT Test Instruments
Ultrasonic Thickness Gauges
Ultrasonic Wall Thickness Gauges
Thickness Meter
Ultrasonic Tester
Ultrasonic Testing
Thickness Gauge
HVAC Meter
HVACR Tester
Material Thickness Meter
Paint Gauge
Paint Tester
Wall Thickness Meter
Wall Thickness Gauge
Condition Monitoring
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-25%
Coating Thickness Gauge PCE-CT 80HP-FN1D5
PCE-CT 80HP-FN1D5
€725.97
€966.89 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT for surfaces
PCE-ATP 1-KIT
€1,253.82
€1,669.91 MSRP
-25%
lifting table scale / industrial scale PCE-HLTS 2T
PCE-HLTS 2T
€3,566.34
€4,749.91 MSRP
-24%
PCE-DPG 100 Pressure Gauge Air Pressure & Water Pressure | PEAK function | 2.5? display | Response time <50 ms
PCE-DPG 100
€253.78
€334.92 MSRP
-25%
1 + 3-phase power analyzer PCE-360 | RS-232 interface | PC cable | software | 512 K data logger
PCE-360
€1,257.56
€1,674.92 MSRP
-25%
PCE-EMD 5 hygrometer 0.0..99.9% RH|0...50 °C|connection of up to four external sensors|anal. 4..20mA
PCE-EMD 5
€598.32
€796.89 MSRP
-24%
Pressure gauge PCE-PME 100
PCE-PME 100
€128.74
€169.91 MSRP
-24%
mold measuring device PCE-PMI 1BT
PCE-PMI 1BT
€89.41
€116.89 MSRP
-25%
Feuchtebestimmerwaage
PCE-UX 3011HQ
€2,995.80
€3,990.00 MSRP
-25%
display / built-in display PCE-BPD-U-46A
PCE-BPD-U-46A
€568.31
€756.89 MSRP
-25%
Closing Force Measuring Device Original BIA Cl. 1 for Bus and Train Doors
BIA1-SY-10-310
€2,654.92
€3,536.01 MSRP
-24%
PCE-CT 25FN coating thickness gauge for ferrous & non-ferrous metals, including calibration set
PCE-CT 25FN
€110.55
€145.88 MSRP
-24%
PCE-DPG 3 Pressure Sensor Water & Gases | 1.4? NPT thread connection| 2.5? large display| Response time < 50 ms
PCE-DPG 3
€253.78
€334.92 MSRP
-25%
ATP measuring device PCE-ATP 1-KIT3 for surfaces and water
PCE-ATP 1-KIT3
€1,441.51
€1,919.91 MSRP
-24%
pH meter PCE-PHB 10 especially for outdoor use
PCE-PHB 10
€72.56
€94.92 MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE Material thickness gauge PCE-TG 75A
PCE Instruments
PCE
PCE-TG 75A
PCE TG 75A
PCE Instruments
PCE-TG 75A
PCE Instruments PCE-TG 75A
NDT Test Instrument
Plastic Test Instrument
Ultrasonic Test Instrument
Ultrasonic Gauge
Thickness Gauge
Thickness Gauge
Material Thickness Gauge
Wall Thickness Gauge
NDT Test Instruments
Ultrasonic Thickness Gauges
Ultrasonic Wall Thickness Gauges
Thickness Meter
Ultrasonic Tester
Ultrasonic Testing
Thickness Gauge
HVAC Meter
HVACR Tester
Material Thickness Meter
Paint Gauge
Paint Tester
Wall Thickness Meter
Wall Thickness Gauge
Condition Monitoring
The material thickness gauge can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sonic velocity in the material thickness gauge. For materials such as steel, aluminium, zinc, silver and gold, the appropriate sonic velocities are already stored in the device library. This means that the material thickness gauge can be used universally.
Individual maximum and minimum values can be stored with the material thickness gauge’s limit value function. If the measured value of the test specimen is outside the limits, the material thickness gauge signals this visually. If required, the material thickness gauge can also provide acoustic signalling in addition to the visual display. The material thickness gauge is therefore used, for example, in quality assurance and incoming goods inspection.
The material thickness gauge has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the material thickness gauge. The stored data is displayed graphically by the material thickness gauge. In addition, each individual measuring point can be approached and read in the graphic of the material thickness gauge. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the material thickness gauge. The material thickness gauge can optionally be equipped with an ISO calibration certificate.
When selecting the measuring range, please take into account the weight of the container to be monitored. Filling quantity + container weight = measuring range. The measuring range is not increased by zeroing the container weight.”
1 x material thickness gauge PCE-TG 75A
1 x sensor PCE-TG 5M10d
1 x coupling gel (TT-GEL)
1 x transport bag
3 x 1.5 V AA batteries
1 x quickstart guide T-1515501 PCE-TG 75A 4250348735546 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-material-thickness-gauge-pce-tg-75a-t-1515501-4250348735546?dc=GB&cu=EUR 2026-07-13 322.01 United Kingdom GB DE 14
Individual maximum and minimum values can be stored with the material thickness gauge’s limit value function. If the measured value of the test specimen is outside the limits, the material thickness gauge signals this visually. If required, the material thickness gauge can also provide acoustic signalling in addition to the visual display. The material thickness gauge is therefore used, for example, in quality assurance and incoming goods inspection.
The material thickness gauge has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the material thickness gauge. The stored data is displayed graphically by the material thickness gauge. In addition, each individual measuring point can be approached and read in the graphic of the material thickness gauge. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the material thickness gauge. The material thickness gauge can optionally be equipped with an ISO calibration certificate.
When selecting the measuring range, please take into account the weight of the container to be monitored. Filling quantity + container weight = measuring range. The measuring range is not increased by zeroing the container weight.”
1 x material thickness gauge PCE-TG 75A
1 x sensor PCE-TG 5M10d
1 x coupling gel (TT-GEL)
1 x transport bag
3 x 1.5 V AA batteries
1 x quickstart guide T-1515501 PCE-TG 75A 4250348735546 en ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/en-GB/pce-material-thickness-gauge-pce-tg-75a-t-1515501-4250348735546?dc=GB&cu=EUR 2026-07-13 322.01 United Kingdom GB DE 14