PCE LED stroboscope PCE-DSX 100

The LED stroboscope is a handy device for measuring the speed of objects with a measuring range of 60 to 20,000 RPM. The LED stroboscope is suitable for inspecting objects with periodic movements and for detecting faults. The LED stroboscope enables precise measurements through fine and coarse adjustment. With the fine adjustment, the speed can be changed in small steps: +0.1 RPM for speeds below 1000 RPM and +1 RPM for speeds above 1000 RPM. The coarse setting allows larger changes: +10 RPM for speeds below 1000 RPM and +100 RPM for speeds above 1000 RPM.

Equipped with an illuminated LC display and a digit height of 16 mm, the stroboscope provides a clear display even in poor lighting conditions. The flash light source with over 36 LEDs produces bright flashes of light for optimum measurements. The automatic switch-off after 5 minutes of inactivity saves energy and extends battery life. The stroboscope has a memory for up to 10 flash frequencies to enable a quick change to different frequencies. The LED stroboscope automatically warns when the supply voltage is too low to ensure trouble-free operation.
Optical speed
Measuring range 60 ... 999.9 rpm
Resolution 0.1 rpm
Accuracy 0.05 %
Optical speed
Measuring range 1000 ... 20000 rpm
Resolution 1 rpm
Accuracy 0.05 %
General technical data
Display type LCD with illumination
Display size 2.1 inch
Memory medium Internal memory
Memory capacity 10 values
Automatic switch-off 5 min
Light intensity approx. 1400 lx @20cm @10000 RPM
Light source 36 LED’s




Battery 4 x 1.5 V AA battery , alkaline-manganese
Capacity 3000 mAh

Operating conditions 0 ... 50 °C , 10 ... 85 % r. h.Storage conditions 0 ... 50 °C , 10 ... 85 % r. H.Dimensions ( L x W x H ) 180 x 68 x 56 mmWeight 180 g
1 x LED stroboscope PCE-DSX 100
4 x 1.5 V AA batteries
1 x operating instructions