PCE Laboratory water activity tester PCE-WAM 60-KIT

The laboratory measuring device for water activity enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity in the range of 0 ... 1 aw and temperature from -10 ... +50 °C.
What does the Aw value mean? The Aw value is the freely available, unbound or active water in organic products such as food or pharmaceuticals, also known as water activity. It indicates the vapour pressure of the food when it is in undisturbed equilibrium with the surrounding air. The Aw value is a decisive criterion for predicting the perishability and edibility of products, particularly with regard to microbial growth, chemical and biochemical reaction rates and physical properties. Contrary to widespread assumptions and common practice in quality management, it is not the moisture or water content of a product that is decisive, but its Aw value. This is crucial for the development and proliferation of microbes, moulds and yeasts.

Our measuring device is equipped with a 7’ touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time. Thanks to the professional sensor, the device delivers very accurate results within 3 to 5 minutes.

The laboratory water activity meter has three different measurement modes: the normal measurement mode, a fast measurement mode and the continuous display mode as well as a real-time display of the measurement curve. It can be calibrated with 1 to 6 points and the menu is available in several languages, including Chinese, English, French and Spanish. The device’s memory can store the data from the 4 channels, with each channel holding up to 65,535 data sets. The data can be printed out at any time using the built-in printer.

The device’s software enables real-time control and display of water activity and temperature. The data can also be output as a PDF, in Excel format or as a screenshot.
This laboratory water activity analyser is suitable for a wide range of applications, including quality control in the food and cosmetics industries, research institutes, biological and pharmaceutical research as well as other scientific laboratories and paper manufacturing. Water activity in food can be controlled by various additives (humectants), the use of suitable packaging materials or the maintenance of optimal ripening and storage conditions. If too much water is available, there is a risk of microbial growth and water migration. Food manufacturers must prove that the water activity of a product has been sufficiently reduced to prevent the growth of bacteria.


Velocity
Measuring range 0.03 ... 5 m/s
Resolution 0.01 m/s
Accuracy ±2 % v.Mw. (0.3 ... 5 m/s)
Velocity
Measuring range 0.1 ... 16 ft/s
Resolution 0.1 ft/s
Accuracy ±2 % v.Mw. (1.0 ... 16 ft/s)
Volume flow
Measuring range 0.09 ... 15 m³/h
Resolution 0.01 m³/h
Accuracy ±2 % v.Mw.
General technical data
Display type LC colour display
Display size 1.44 inch
Display resolution 128 x 128
Interface Ethernet, PoE
Materials copper
Measuring medium water
Repeatability 0, 2 %
Communication HTTP, MQTT
Menu language English (US), Chinese, English (GB)
Protection class (device) IP54
Power supply PoE
Plug type RJ45




Operating conditions -10 . .. 50 °C , 0 ... 99 % r. h.Storage conditions -10 ... 50 °C , 0 ... 99 % r. H. Dimensions ( L x W x D ) 65 x 111 x 43 mmWeight 859 g
1 x laboratory measuring device for water activity PCE-WAM 60
4 x aw sensor
4 x sample holders
20 x sample dishes
1 x USB cable type B to type A
1 x power supply 12 V, 5 A
1 x PC software (Windows 10 or higher)
1 x operating instructions

The software can be found in the download area.
Compatible with Windows 10 or higher.